P1130 swirl valve and p1165

[Hb fanatic]

Ok so a check engine light is on in my 1996 nissan hardbody initialy it was just a p1130 so i found the harness to the swirl valve control Solinoid was broken and spliced it to no avail. Next i cleared all the vacuume lines and this didnt work either but i got a new code to go with it its p1165 for the swirl valva control check valve on the fender well i tested it and its not working. So i take one off an extra truck the same year and i fixes that code but not the p1130. Also if anyine knows where i can buy the check valve i need to buy one, the one i got may or may not have been from my brothers daily driver.

[centralcoaster33]

I've replaced both on my car. The swirl valve I replaced only because I mis-diagnosed it because I didn't understand how it worked. The solenoid I thought was fine and focused on the harness, but it wasn't fine (the harness was) and I had to replace it. Both parts I found off of random Nissans and Infiniti's at the junk yard. Darn near anything in the same era will have similar parts. For the swirl, be sure to match the vacuum numbers printed on the little sticker. For the solenoid, anything close will work, just be sure the plug matches your harness plug.