Overheating after radiator swap

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
EvillE423
Posts: 752
Joined: Mon Jan 01, 2007 2:19 pm
Location: Tri-Cities, TN

Post

Have a '91 KA24DE with roughly 191,xxx on it. I notice a crack in the stock radiator so I ordered an Isis aluminum one from Enjuku. Swapped it out today, jacked the front end up, then filled it up. Sitting in the driveway it never overheated, but when I took it around the block, it did. Could this be airlock? I've bled the system with the little screw on the intake manifold and added more until it came out the hole, but it still overheats. Any ideas? I'm so pissed off right now, everytime I buy something for it, something else tears up. Please help!!!

EDIT: I left the heat on while I was filling it up. Just throwin' that in there.

Modified by EvillE423 at 8:54 PM 7/9/2009
Modified by EvillE423 at 8:54 PM 7/9/2009


User avatar
EvillE423
Posts: 752
Joined: Mon Jan 01, 2007 2:19 pm
Location: Tri-Cities, TN

Post

Fixed....

skywalkinv003t
Posts: 14
Joined: Sun Jun 28, 2009 2:49 pm
Car: 95 nissan 240sx

Post

is it clogged? or maybe u had a bigger problem than u thought from the beggining. do a compression test, if all good then check ur thermostat, if all good, get a rb lol


Return to “240SX Technical Forum”