OutToWinPAHC's LS6/T56 s13.5 (no longer my car)

[OutToWinPAHC]

Well it's a bit redundant seeing the coils are on the car in the pics lol.

To clear front coilovers on a 8 inch wheel you need +32 or lower. I use a 17x8+31 with 225-45-17's up front.

[nitsujvg]

haha yeah i realized they fit but i wasn't sure what you were running up front. pretty sure you didnt you spacers though.

thanks for the answer though

[OutToWinPAHC]

Next big purchase is going to be a 3qt Canton Racing Accusump. The LS series have some oil foaming and starvation issues, so it will be good insurance.



normal running condition:oil pick up supplies oil from oil pan via oil pump and supplies oil to engine

low pressure condition:oil pick up runs dry during high G force condition, accumulator injects oil into engine

[J14cm7]

Now that is freaking cool. Did you read my question about what you thought the final HP/Torque numbers were gonna be?

[OutToWinPAHC]

I did, I just don't say. And when I run the 1/4 mile it will be with a big N/T on the the quarter glass

[OutToWinPAHC]

coils are settling, its a bit lower from sitting. finishing the wiring and hood trimming tomorrow, then its off to the body shop on Tuesday.

[OutToWinPAHC]

Today...New rubber onCut hood some more, closes 100%Wired gaugesButton flew out of the ebrake, need a new one now.Body shop tomorrow

[justinedible4]

love it. period.

[Lonismos14]

Man almost done. huh i kno your happy. :-)

But can you do another video like u did when you first finished the motor swap that will be sweet.

[Bumnah]

Do a nice weld in cage next. Get rid of the Cusco Safeless 21.

[OutToWinPAHC]

In the bodyshop

[OM3GA]

Great build man. Nice attention to detail. Bravo

[OutToWinPAHC]

And no to 10.5 wheels. If I go wider I am am going with 60MM Orgin V3 overfenders with 17x11 or 12 with 335's.

Cage is okay for now, next year maybe for a 12 point.

I AM LOOKING TO BUY A S13 E-BRAKE ASSEMBLY AND RADIO/SHIFT BEZEL (TABS ARE BROKEN ON MINE.) SO IF YOUR SELLING i'M BUYING

Oh and I dropped it off at 5 stars auto today to get the fenders merged and front end painted.

[OutToWinPAHC]

Got a ebrake on the way, also ordered Bride FG drivers rail from FRsport.com.

Next... adjust coils now the car is settled, Install proper o2 bung for AEM uego, alignment, tuner.

Issues - Wideband is allover, I used an existing bung and its too deep. Oil drain plug is dripping, new one on order.

STILL NEED A RADIO/SHIFT BEZEL WITH GOOD TABS

[Lonismos14]

So when is the bodyshop going to be finished? And have you considered making that video for me i mean us.

[sci2000tech]

Is that an OEM s15 hood?

I've been having the hardest time finding an OEM hood for my car that won't cost $400 just to ship from overseas

Can't wait to see it out of the bodyshop.

[OutToWinPAHC]

OEM hood, OEM bumper support, OEM Bumper, OEM S15 fenders. I picked it all up from a local JDM warehouse. Ran me 1100 without headlamps, sold my fiberglass setup for 600. Paint should be done mid next week I guess. I told Peter at 5 stars no rush, take your time.

[OutToWinPAHC]

Stopped at the body shop today to drop off some hardware. They started working on it today so next week. While the garage was empty I brought my bike from my other garage and worked on it and got it back together.

All I need to do is pull the rear wheel paint it sparkle black, and have the new tire mounted and balanced. Thinking of selling her for $2500, thinking of getting a cruiser... broke my back in 2004 in a bad accident and leaning or riding for a while really really hurts me.

[Lonismos14]

I hate motorcycle's i get a reminder every winter from my ankle on right leg and knee on the left leg, as to why i will never own another one.

Whenever i start talking about buying another bike i just look at my a**. The color has never came back.

Cant wait until your car comes out. So after the paint shop whats the next thing for your 240 and dont say your selling it.

[OutToWinPAHC]

Install bride FG seat rails, set ride haight now the coils are settled, allignment, having it retuned, installing an accusump.Not selling anytime soo, cant afford to, but when I am bored with it I might consider trading it.

[OutToWinPAHC]

Gonna stop at the body shop tomorrow if I'm not tied up selling the CBR. I am going to take some pics of her.

Personal plate came...... "SR20 LOL"

The bike, new rear tire on, rear wheel painted, ready for a new owner so I can buy this.

Want one of these.

[OutToWinPAHC]

Some shots of the fenders being merged.

[crakin]

Nice choice of bike man. conversion seems to be coming along nicely.

[OutToWinPAHC]

I got a new bike..... Saints logos are coming as soon as I get it home.

1996 Harley evo engine 1340CC fresh built. Paugcho Rigid Straight leg frame powder coated gold· 4" over Springer Front End· 4-Speed ratchet top Transmission· Kick and Electric start· 3" BDL Open Belt Drive Primary· remote oil filter set up· Paugho upswept exhaust· Z-ape bars with Flyrite white grips· 16" wheels with 40 count spokes and new wide white tires· stretched sportster tank with custom paint· Biltwell solo seat pan with handmade custom cover and LaRosa billet seat shocks· Rigid Solo bag· Mini-speedo

[car nut]

^

[OutToWinPAHC]

I stopped saying take your time to my body shop body after having to postpone two appointments with he tuners. Picking the car up tomorrow after work or early Saturday morning. Then I am adjusting the height, taking it for an alignment, then getting a tune in time for a meet on Sunday.

Ordered my accusump parts, will be installed for Nico fest.

[C3Sierra_S2000]

Bike is pretty sweet. I've been wanting to build a bobber.

[kevinphan]

A lot of things on that bike look horrid. Do you mind me asking how much you paid for it.

[Dire91]

Are those BC Type BR Coilovers!?! How do you like them, how do they sit, how do they feel?

[OutToWinPAHC]

A lot of things on that bike look horrid. Do you mind me asking how much you paid for it.

Horrid how so? All new quality parts, old school style. Paid pennies on the dollar, rather not say just for when I get bored and sell.