output shafts

Information on the naturally-aspirated KA24E and KA24DE engines.
User avatar
duece.four.oh.sx
Posts: 357
Joined: Thu Aug 10, 2006 8:10 pm
Car: 1965 chevy corvair turbo

Post

so i was working on the car today finishing up little things here and there , finishing up my diff swap and i forgot where the output shafts go (tall on pass side or vise versa?)so any help would be appreciated ......


liquid_cool
Posts: 1700
Joined: Sat Jul 05, 2008 3:02 am
Car: 1990 Nissan 240SX KA24DE-T swap 8.6:1cr, duelsprings, ti retainers,supertech pistons, K1 H-beems balanced internals ect ect

Post

it dosent tell you didly in the service manual that i could find....so i sugest you try installing 1 side..start with the long one and see if it fits corectly..if it does..you in like flynn...but before you do that..you might wana see if ya can get some better contition parts ,as those look a little chewd on..

sorry no one can answer a definit man..hope this helpd.

atownnismo240
Posts: 8
Joined: Sun May 03, 2009 8:24 am
Car: 92 hatch

Post

what diff did u use and what r those output shafts off of

User avatar
usar89b
Posts: 87
Joined: Tue Aug 15, 2006 6:39 pm
Car: 89 Nissan 240sx

Post

look like pre 95 J30 output shafts to me.


Return to “KA24E / KA24DE Forum”