Opinions on Wheel Bearing vs. Hub Replacement

ONLY for ADVANCED technical discussion about the 240sx!
Post Reply
Craig240
Posts: 34
Joined: Wed Aug 17, 2005 1:42 pm

Post

What is the consensus here on pressing in new bearings for the front hubs when one goes bad? The FSM says to replace the whole bearing/hub assembly. I've pressed in new bearings on my Audi and everything seems fine. The difference in price is quite high. Any experience?

I have a 95 s14 se.

Top
liquid_cool
Posts: 1700
Joined: Sat Jul 05, 2008 3:02 am
Car: 1990 Nissan 240SX KA24DE-T swap 8.6:1cr, duelsprings, ti retainers,supertech pistons, K1 H-beems balanced internals ect ect

Post

you can just replace the bearings and the race man..no biggie...the factory wants you to buy new hubs..but in reallity..the hub will be fine with just a simple bearing replacement..good luck..keep us posted.
Top
Post Reply

Return to “240SX Technical Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy