Opinions on this egay ECU chip!

[spank044]

Has anyone used this and what are your opinions and thoughts.

http://cgi.ebay.com/ebaymotors...&rd=1

[BadMojo]

Has anyone used this and what are your opinions and thoughts.

http://cgi.ebay.com/ebaymotors...&rd=1

I think the guy that sells those might post here at NICO. The instructions in the auction are a little misleading...it's a chip and daughterboard that needs to be soldered on to the PCB of your ECU.

I have no idea how good the tune is or even if the seller is the person who actually did it. Some Ebay sellers take tunes that other people wrote, burn 'em on chips and sell them as their own.

[neverlift]

try slipnfall he sells deviouska's tune IIRC

[nelson8708]

I have one of these chip laying around if you want it. It is for I/H/E. It is deviouska's stage three tune. There was a big thread about this on 240sxforums.com. One guy gained 8whp i think it was. I am boosted now so i can sell you my old chip for 20$ shipped if you want it.

p.s.the tune itself is free off of hybridka.com but the chip is i think 7$ and a burner is 60$. If you still want it let me know. I would not trust them to tune for boost or any major upgrades such as maf change or injector size change.

[boznuttz]

dont trust ebay

[spank044]

Thanks guys,

I am planning on getting the BikiRom megaboard in the spring, but I was just curious.

[ryancoke]

Ya i bought that same chip about 3 months ago, basicly you have to remove the stock Eprom chip, and install the new one, it worked on my end, my 240 was an auto with a ka24e, and it raised my max rpm from 6500, to 7000 rpm. Also in the 1/4 mile my old time was usually a high 18 secs, but after the chip i was running 17's flat, everytime. The only catch is that your ecu has to have either the eprom chip in it, or be able to have a daugter board installed.

[LayNLow240]

Ya i bought that same chip about 3 months ago, basicly you have to remove the stock Eprom chip, and install the new one, it worked on my end, my 240 was an auto with a ka24e, and it raised my max rpm from 6500, to 7000 rpm. Also in the 1/4 mile my old time was usually a high 18 secs, but after the chip i was running 17's flat, everytime. The only catch is that your ecu has to have either the eprom chip in it, or be able to have a daugter board installed.

wow, something is wrong if you can only manage 18 in the 1/4 stock.

[neverlift]