Omaha Street racing and my RB25

[DETurbine]

Here are a few videos of Omaha, NE Street racing....has video of my RB25DET S13 in it.

1. http://www.neneons.org/vids/linc4.17part3.wmvfirst video I race a semi built GSR turbo hatch with some really nice suspension, FMIC, stand alone, and a bunch of other goodies. Compared to my stock SMIC, 205 all seasons, blown stock struts, and stock motor and no controlers what so ever (aka stock RB25 sway, can't get any more basic tthen that).

2. http://www.neneons.org/vids/sr4.16.04big.wmv.wmvThis video is filmed from a 6.0l swaped Chevy truck....it has a T67 on it and a 150shot (didn't use it on this video). This truck ran a 10.9 with nitrous. Truck is crazy. Also you will see that I am a flamer in this video....lol. I was running a little rich.

[NX95240]

that chevy truck is bad a**

[Yellow4g63]

something wrong with 1st vid only got 9megs then it stops

[GEO]

right click and SAVE TARGET as..

[Yellow4g63]

right click and SAVE TARGET as..

I did thats why I know it was 9 megs.

[score]

More info on the truck please!

[Chingon]

the fc on the 1st vid was wicked....and so was that truck!

[DETurbine]

The truck has a 6.0l swap with nitrous and a T67 turbo on it. It is the worlds quickest hard body Chevy truck. It is 4wd and ran a 10.9 at the track. He has a ARP head studs, I think new valves and that is about it. You will be seeing his truck in about three months in HotRod magazine.

[Fish240]

nice kill on the v8 mustang

[PhaneSoul]

NX95240 - please fix your signiture, you being unable to do correct html code is making all posts below you join your post.... anyone else understand what im saying?

[240SXer]

What did that Hatch have in it that you couldnt take him in your RB S13.. Seems like he mainly pulled on top. You need better tires

[240SXer]

haha.. I love how you keep walking that WRX.. is it an STI? Nice kill.. He should have stopped trying.. You walked that SRT-4.. cool video!

[kouki-gymkhana]

Hey DET turbine, what's your current setup? Are you running a stock RB25det at stock boost or what because your car is awesome! That's probably the best video footage anyone's ever posted of how the RB swap stacks up against the competition on the street. Good sh*t!!

-kouki:ylsuper

[MustangManV6]

nice kill on the v8 mustang

The V6's are actually faster

[DETurbine]

What did that Hatch have in it that you couldnt take him in your RB S13.. Seems like he mainly pulled on top. You need better tires

That is a semi built GSR with a t3/to4e turbo in it and race gas. stand alone system and about 12psi on the turbo. He has a nice suspension setup and it is really clean and pulls really good top end. I was suprised, but then agian am not ashamed to loose to it. I have $4k into my car.....lol

kouki-gymkhana- My car is fairly stock. I have a GTspec exhuast, 3inch test and down pipe, ACT HD clutch, and 10psi. Other then that I have blown struts on sportline lowering springs, 205 all season burned up tires, and at the time of the videos just had an open rear end. I now have an R200 that I just installed not to long ago. If you watch the video of me vs. the hatch, you can here me lossing traction through third gear why he just hooks up and goes.

Oh yeah the comment about the V6 mustang being faster then the V8.....lay off the crack!...lol.

[240SXer]

You hooked well for an open dif on 205s? What did you launch at? 1500rpm? Cool videos. Get some drag radials and go walk that hatch

[DETurbine]

You hooked well for an open dif on 205s? What did you launch at? 1500rpm? Cool videos. Get some drag radials and go walk that hatch

lol.....don't know. Didn't have a tach at the time....all by sound and feel of the car and motor.

I just fixed my tach and now it is working perfectly fine. I would say I launched it around 3500-4k. I have some K1's with some Nitto drag radials on it right now.

I am going to be installing a FMIC soon and will be turning up the boost to 15psi and will be getting some new fresh 245/45/16 drag radials and will race the hatch agian. The hatch ran a 13.5 with 10psi and without race gas, so I am think he is a low 13 as it sits that night. Will keep you all updated on that.

[240SXer]

Ya.. From the looks of the video with just drags you'd take him. You pretty much held him the entire time. You should have been able to walk him off the line. You were spinning pretty bad. I hate spinning like that. I'm on 245/50R16 Nitto Drags. I hook like mad. I walk everyone off the line, it's great. Till I break something.

[JustinStrife]

Very very nice.. I'm kinda anxious to get further along on my project. That RB is sounding SWEET man.

[Yellow4g63]

?? Why can't I download the vid lol? I try and try and only get 9megs,7megs,11megs. It's like it's dropping packets at my door step and not picking them up

[JustinStrife]

Haven't watched it yet, but I downloaded the first video by using Getright. Doing a save target as stopped at 9mb.

Try using the program Getright it should work the full way.(not sure why though)

just watched the first video finally. Liked the second one better ^_^

[Projex240]

lol--that truck is cool--dude must have some serious dough. The rb ran pretty damn good--the truck didnt pull THAT hard on ya.