Ok I Need To Verify This....

[PROJECTRB240SX]

THE CLUTCH THAT WORKS ON THE RB20? I AM KEEPING ONE OF MY RB20'S STOCK AND I NEED A CLUTCH FOR IT.... I JUST WANT TO KNOW WHAT CLUTCH TO GET THAT WILL WORK WITH IT.

SOME SAY THE NA Z32 AND OTHERS SAY THE SR20DET CLUTCH.

I DON'T NEED A HIGH PERFORMCANCE CLUTCH JUST A STOCK REPLACEMENT. THANKS FOR THE INFO.

BTW: LETS KEEP THIS OPEN, FOR ANY QUESTIONS NEEDED TO BE ASKED BY ANYONE ABOUT RB20 PARTS.

[spec-v5150]

clutch-I hear Z32 N/A

I wanna know oil filter, fuel filter (Z32??), I know there was something else....

[PROJECTRB240SX]

I HAVE CROSS REFERENCE THE FUEL AND OIL FILTERS THROUGH MY COMPANIES VENDOR TO A Z32. I HIGHLY RECOMMEND A OIL FILTER RELOCATION KIT.

[spec-v5150]

why and where the hell would you put it??

[PROJECTRB240SX]

It is easier to change filters and they make adapters for anytype of filter you want to use. you can put it anywhere you want. i'm putting mine on the fire wall.

[SHIFT_Lock]

every rb20 i have done has used a aftermarket sr20 clutch.the rb25 was close but one hole was off. but the rb20 and sr clutch are one and the same.

[PROJECTRB240SX]

OK BUT WILL IT BOLT UP TO MY FLYWHEEL?

[JCAP_Tuning]

I tried bolting up a SR pressure plate to my RB25 flywheel and it was barely off, so close you could slot the dowel holes and then bolt it on. The clutch disc itself has the same spline as SR and KA so either will fit.

From what I understand the z32 n/a pressure plate should bolt up to the flywheel, or at least I hope so. Looking for a decent priced high performance pressure plate, I already ordered a NISMO street disk and z32 throwout bearing. I will post pics once I get all the parts in.

[blue240]

I bought a stock replacement z32 na clutch disc/ press. plate for my rb20 and it bolted right up and works great.

[PROJECTRB240SX]

HOW MUCH DID YOU PAY?

[JCAP_Tuning]

I just got back from a Nissan only junkyard to pickup some taillights and they had some used z32 pressure plates laying around, I took my old rb25 pressure plate and did a comparison and they are the same bolt patterns, so now I know for sure the z32 clutch disc and pressure plate will bolt onto the RB25 flywheel.

BTW... Courtesy Nissan has great prices on both Nismo parts and OEM http://www.courtesyparts.com thats where I ordered my Nismo clutch disc ($218.00) and throwout bearing ($28?)

[blue240]

i paid about 160.00 or 170.00(can't remember exactly) from advance auto parts.

[SHIFT_Lock]

if you have a stock rb flywheel then yes of course. or a maxima clutch workes too...hense the z32 na also.