Oil on sparkplugs.

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
slideways21
Posts: 37
Joined: Tue Jan 13, 2009 8:13 pm

Post

soo i receently changed my sparkplugs and i noticed that my 4th sparkplug closes to the firewall has alot of oil, there first 3 are fine except the 4th one.. Whats wrong with it and what will this cause?


cody180sx
Posts: 303
Joined: Sun Apr 22, 2007 2:54 pm
Car: s14 rb25det fully built 550whp coming soon

Post

check the seal under the valve cover it could not be seating right or it could be pinched

User avatar
Justin35ll
Posts: 1421
Joined: Fri Oct 17, 2008 6:57 pm
Car: s13 coupe sr20det

Post

What he said. Maybe it's time for a new valve cover gasket kit.

Where exactly was the oil? On the electrode or in the spot where the coilpack connects and the socket goes in?

User avatar
the converted
Posts: 2767
Joined: Wed Feb 21, 2007 7:14 am
Car: '99 BMW M3 6.0
'88 Toyota Celica All-Trac (somewhere in Cali)
'20 Toyota Tacoma
Location: Boston

Post

Also do a compression check. The 4th cylinder always runs leaner than the other cylinders, and the rings may have gone bad there.

slideways21
Posts: 37
Joined: Tue Jan 13, 2009 8:13 pm

Post

im gonna change my head gasket and valve cover gasket. The oil was all over the sparkplug/electrode area.

cody180sx
Posts: 303
Joined: Sun Apr 22, 2007 2:54 pm
Car: s14 rb25det fully built 550whp coming soon

Post

there is also a spark plug well gasket when u take the valve cover off it will be in the center were the plugs go into the head can't miss it check that

User avatar
the converted
Posts: 2767
Joined: Wed Feb 21, 2007 7:14 am
Car: '99 BMW M3 6.0
'88 Toyota Celica All-Trac (somewhere in Cali)
'20 Toyota Tacoma
Location: Boston

Post

Do a leak down and make sure that it is the head gasket. It sure would suck if you changed it and got it all back together to only have the same problem.

User avatar
Justin35ll
Posts: 1421
Joined: Fri Oct 17, 2008 6:57 pm
Car: s13 coupe sr20det

Post

Head gasket has nothin to do with oil really. Mostly coolant. Do a leak down and a compression test you might have bad rings causing blow by which = full rebuild


Return to “SR20DET Forum (rear-drive)”