Oil leak

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
rahjah6687
Posts: 52
Joined: Mon Apr 23, 2007 4:08 pm
Car: 1990 240sx hatch redtop sr20det

Post

Ok, so I have some oil below my crank pully and down on the front part of my oil pan so I'm guessing it's the front seal. There is no oil above the top half of the crank pully. If this is in fact my problem, what is the easiest way to replace this seal? Thanks for the help.


Blown240sx
Posts: 1963
Joined: Thu Apr 21, 2005 3:20 pm
Car: 1996 240sx

Post

Remove all beltsRemove the crank main boltGet slide hammer and remove crankPull seal but be careful not to scratch up the walls insidePut new seal in and reapply crank pully and tighten the pull back down


Return to “SR20DET Forum (rear-drive)”