Oil every where

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
phyco99
Posts: 76
Joined: Sat Aug 14, 2004 6:12 am
Car: 95 240SX Stock

Post

To start I live in Savannah, Ga and I had to drive to Augusta, Ga to do some training. So I went home this past weekend, and I was checking my ride to get her ready for the ride back to Augusta. To my surprise I see a puddle of oil on the passenger side, but it is towards the front of the car. So I opened the hood and I see that there is oil on the bottom half of the engine. I notice that it is on the main pulley, (sorry I can not remember the name for it!) I can not tear it down because I do not have the time, and I am still in Augusta, can I get some ideas. Could it be the oil pan? It seems that there is more splatter on the passenger side of the of the engine bay. Or is there a good place here in Augusta that I can take it in? I can really help use the help!


User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

It's probably the front main seal. The oil leaks out of it onto the crank pulley and gets slung every which way. It's a fairly eash seal to replace.

User avatar
phyco99
Posts: 76
Joined: Sat Aug 14, 2004 6:12 am
Car: 95 240SX Stock

Post

Easy? Great! Any posts that can help me get it done?

theother1wstolen
Posts: 263
Joined: Mon Jan 15, 2007 5:23 am
Car: 92 240sx Coupe SE

Post

i recommend picking up a harmonic balancer removal tool, i changed mine and with the tool it took under an hour to do.

Drake
Posts: 4
Joined: Sat Jun 24, 2006 3:38 pm

Post

theother1wstolen wrote:i recommend picking up a harmonic balancer removal tool, i changed mine and with the tool it took under an hour to do.
And an impact wrench, quickest and easiest way to get the nut off without turning anything.

User avatar
phyco99
Posts: 76
Joined: Sat Aug 14, 2004 6:12 am
Car: 95 240SX Stock

Post

Is there a post that has some details that have done one? Also, do I have to do the timing also? I really dont know how to do that.


Return to “240SX Technical Forum”