I need the neoprene factory oil cooler gasket for my DET, it was bad before I installed the engine and two years later leaks like a seive. Where's a good place to order one ???
The local bearing and seal shop couldn't match it.
Obviously I can't make one, and silicone is not an option...
US nissan parts suppliers are beyond useless... the last time I checked "umm", "ughhhh", and "good luck" are not car parts.
Aftermarket people don't stock small oem crap...
The .co.uk and .au websites that I found are a joke, you can't even start to look for parts without giving your personal info and vin(for a car I obviously don't have)...
If I have a choice, I dont' want to remove it and run a remote oil cooler(cost or hassle)...
OEM DET parts
-
RED_DET
- Vendor
- Posts: 5335
- Joined: Tue May 13, 2003 5:07 pm
- Car: 2004 Infiniti G35 Sedan 6 spd
2011 Infiniti G37x
1992 Nissan Sentra SE-R SR20DET
Chevrolet Corvette Z06 - Location: Louisville, KY
- Contact:
Re: OEM DET parts
You can try Greg V @ Gspec.com
-
mcblacktiger
- Posts: 8
- Joined: Sat Aug 11, 2007 7:22 pm
Re: OEM DET parts
Thanks for the contact. Wrote him 3 days ago and nothing back; guess that means he dosen't have any ideas either.
-
RED_DET
- Vendor
- Posts: 5335
- Joined: Tue May 13, 2003 5:07 pm
- Car: 2004 Infiniti G35 Sedan 6 spd
2011 Infiniti G37x
1992 Nissan Sentra SE-R SR20DET
Chevrolet Corvette Z06 - Location: Louisville, KY
- Contact:
Re: OEM DET parts
That is strange he didn't respond. Maybe some RTV cooper sealant may do the trick.
-
ViceIntruder
- Posts: 22
- Joined: Mon Sep 06, 2010 10:50 pm
- Car: Nissan Verza 2007
- Location: Pacific
Re: OEM DET parts
Maybe Greg was busy....
-
PapaSmurf2k3
- Site Admin
- Posts: 19000
- Joined: Thu Nov 21, 2002 3:20 pm
- Car: 2017 Corvette, 2018 Focus ST, 1993 240sx truck KA Turbo.
- Location: Merrimack, NH
Re: OEM DET parts
Yeah is there a reason it has to be neoprene?
Return to “Sentra Forum / Infiniti G20 Forum / Pulsar / NX Forum”