OBX header EGR help

[RipShift]

For those of you with the OBX header, I have a quick question. How did you bend the egr pipe to meet with the fitting on the header? I cant bend it by hand so I wondered you used, a crow bar, a screw driver, or something else? Thanks

[sunnys14]

i cut a piece off the EGR pipe, screwed the EGR fitting into the header then took a small piece of high temp heater hose and hose clamps to connect the missing length.

[Infidel]

I have this exact header in my 240, i just used breaker bar to bend, didnt damage the egr pipe either, works easier with a longer breaker bar

[essjedix4]

i put the egr on first before tightning neting and then when i got it on and semitight i tightened the bolt thats closest to the egr and then tightened the rest u culd say it bent by itself the egr isnt all the way on but its tight enought and i say about three threads r still out try dat

[BIGT94z]

i did it the old fashion way and used a torch to slighty bend it. worked great for me and took like 5 minutes