Not your typical wiring issue

[Pa240drifter]

I'm an ***, was searching for the wrong terms.You all are free to comment on how much of an *** I am.

Modified by Pa240drifter at 7:18 PM 7/11/2005
Modified by Pa240drifter at 7:19 PM 7/11/2005

[gawdzilla]

1. the ecu doesnt see the oil pressure. you can use the KA's but there is no point. the KA oil press sender only has the oil light, and you can just use the RB's. the RB's sender has low pressure light, as well as the actual pressure reading. just dont plug up the pressure reading.

2. not sure what you're asking here... but the rb has the knock sensors as part of the lower. don't lose those.

3. you can use the KA's alt plug

[Pa240drifter]

rb20 doesnt have a knock sensor down there. i found my answer after searching harder.