Northern NJ drift/drive club

[Samurai C]

My friend told me he needed a swivel 14mm socket to get to the bolts at the top of the transmission. So tools we need are puller, 14mm swivel with long extension, breaker bar, and torque wrench.

jeez ill just bring my whole box lol i have all that stuff and ill bring some more stuff too to speed up the job

[mirochuki13]

Haha. Thanks. The garage is not very well equipped.

[flipboi96zx]

d

Ya, definitely come over if you have time. Let me know your e-mail, and I'll send you the address of the garage.

sweet, email me the address to [email protected]

[B-Boy DuB-L]

I'm excited but yet im also ****in nervous. lol I dont wnat the transmission to be ****ed

[Samurai C]

what time u guys starting u need me to drop some stuff off on tuse i dont want u waiting for me to get there

[mirochuki13]

Nino, what's your e-mail? I don't think I ever gave you the address.

Sam, if you have time, drop the stuff off on Tuesday. I'll be there working on something as usual. I guess we'll be starting at 5 on Wednesday.

[Samurai C]

i can do that and anyway i wanna BS about the drift bible and i remembered my shifting thing i wanted to ask u about so ill just call u for the address and ill pop it in my cell

[mirochuki13]

Awesome. I'll see you tomorrow.

[B-Boy DuB-L]

Yea i'll prolly just call you for the address it will be easier.

Umm does anone have an air compressor? cuz it will be easier and faster if not then oh well some man power will do the trick

[mirochuki13]

Nino, I drove your car back and forth in the garage. It stopped making the whining sound and works fine. My dad looked at it and said the clutch was fine and that it'll get easier to shift as the clutch gets worn.

Also, he said the reason for the revving is because of the auto ECU. When the engine is loaded with an automatic transmission, the ECU increases RPM by itself to keep the car from "stalling". So that's what it's doing when you start to let go of the clutch. Either drive it like that or get a manual ECU.

Basically, the car is done. Come and get it. I won't be around tonight or tomorrow, but you can come get it Sunday. Or call Dat to open the garage for you if you want it earlier.

[Samurai C]

lol guess i should have hung out alittle longer what time did u finish

[mirochuki13]

We finished this morning without sleeping last night. We had to take the transmission out and put it back in (long story). Sorry for keeping your tools all week. You sir will get a six pack next time we meet up (and your tools).

[B-Boy DuB-L]

haha yea ill split the cost of the six pack. Or maybe just buy one of corona

Umm thank god . That was one of the things i thought but wasnt sure about. Haha so that means it will be alot harder for me to stall yay. Lol But i can come pick it up tomorro. Which is sunday. umm i think around 12

[tjmhillz]

so nino u finally have a real car? try not to kill ur self and stall in the middle of the highway. i member u was tellin me about that storie wit u and rob hahhah.

[Samurai C]

dont worry about it i was happy to help u gotta tell me why u had to take the trans out u should have call me i would came back to help last night but anyway let me know when u will be at the shop ill come down to hang and mess with my ride

[B-Boy DuB-L]

Alright 2 things. TJ No I wont stall on the highway lol How do you even remember that haha.

Sam we decided to take the transmission off again around 6 after bleeding the clutch like a 1000 times. We thought it was a problem with the throw out bearing. We weren't gunna call you cuz u had work. Plus lucky for us the transmission went in with the first time of lifting it. "YES"!!! lol i didnt have to be holding the front up forever

[Samurai C]

sh*tty what ended up being the problem

[B-Boy DuB-L]

umm Nothing ended up being the problem. Just us not thinking clearly from lack of sleep and being under a car for 2 days. Basically we thought it wasnty disengaging the clutch after we bled it for like an hour. but yea

[tjmhillz]

so nino is ur car running?

[B-Boy DuB-L]

Yes it is Tj Yes it is

[Samurai C]

ugggg u guy should have call me lol but good thing its running have fun

[Samurai C]

OMG! check this puppy out i want it!!!!!!!!!!!!!!!!

http://www.sardracing.com/products/SARD_RD1.htm

[mirochuki13]

Pretty sweet display, but Sard offers some more impressive displays for not too much more.

I won't be able to make it to E-town tonight (prior commitments with woman), but doesn't really matter since it's C group only. But Sam and I will probably be meeting up in the garage on Thursday, and everyone is welcome to come hang out.

[EDT007]

Sorry, I've been MIA guys. Been working alot. As for the project drift car it's still under way. I'm hoping to have some new parts coming in soon. Miro, we have to get the shell to the shop to start prepping it for paint/cage/swap. Did you guys end up getting the welder?

[mirochuki13]

We've always had the welder. It's the tube bender that we need. I'm trying to find a used one to get it for cheaper. Let me know how you plan on moving the car.

[Samurai C]

really u got to show me and i order my small clutch parts today ill show u the order numbers miro so u dont kick my a** lol

[EDT007]

Miro, I sent you an email. Let me know.

[StricNyne]

D@@@@T ((DAT)) i been trying to get in touch wuth u mang !! i need that front turbo dump !! LMK i will come scoop it up and check out yer whip !

[mirochuki13]

Sam, I'll be at the garage today 7 - 9:30 ish.

So there will be a beer garden at the August 16th E-town drift event, more incentive for people to come out.

[UsJdmTuner]

wassup guys... IFX BBQ this sunday AUGUST 3rd Staten Island NY... this should be a chill hang out.. here is the link: http://www.importfanatix.com/F...=6539