NO START s14 red top sr20det NO START

ONLY for ADVANCED technical discussion about the 240sx!
boett39
Posts: 34
Joined: Mon May 18, 2009 8:00 am
Car: 1995 240sx

Post

i just got my car back from the tuner and what not and now my car will not start at all the starter does not click or do anything..

when i turn the key to ignition i can here the ECU start and the fuel pump start and my fans turn on..when i turn the key to start nothing happens at all and the fuel pumps are no longer heard nor the ECU im running and AEM ems and the car ran fine when it was tunned..

previous to tunning occassionaly to getting the car to start i would have to pump the clutch sometimes so the clutch pedal would make a safety switch or something.. now even pushing in the safety button the car will not start at all or turn over..

is there anyway that i can wire the switch up so i would not ahve to push in the clutch at all to start the car?? does anyone know how to go about doing this or has anyone done this??

PLEASE help i cant even drive my car Thanks


User avatar
s13_chris
Posts: 965
Joined: Sat Jun 09, 2007 6:45 pm
Car: 90 240sx Hatch

Post

the switch you are talking about: cut the two wires coming out of it and connect. Done with that. Anyways good luck don't overlook the simple stuff check all fuses.

If this JUST started happening once you got it back from tuner take it back and say this started happening after you worked on my car. fix it.


Return to “240SX Technical Forum”