No Spark, Q45 Ignitor Chip

[JKon13]

ok so ive got the Q45 ignitor chip and ive got the plugs all wired up and everything, however ive got a blue/red coming from the harness side that isnt going anywhere, and a black/yellow from the coil packs not going anywhere either.

Now this black/yellow should be the output for the packs right??? it has 3 white wires and 1 black/yellow wire running into it to make it just 1 black/yellow wire. im not too sure on this whole thing.

Either way, i matched up the old plugs and according to the old plugs the blue/red and black/yellow should run together. Does anyone know if they do? If not do they just hang there? or do they need to go somewhere?

[turblu]

bump- similar situation here

[Sleeper415]

iv got the same thing but the blu/red wire runing from my ignitor chip to the coil packs plug on the side of the manifold matches with the blk/yellow that gose to the coil packs harness. NOW this is my problem i have a s13 redtop ignitor chip and i was only geting spark from 3 cilinders #1,#3,and #4 so i wint and i got a Q45 ignitor cuz i thought that was my problem and i got the same thing.

id like to know how the wires go in the coilpacks harness so i can sheck mine to see if its the same cuz i think thats my problem.