Post by
Florida240sx »
https://forums.nicoclub.com/florida240sx-u17691.html
Thu Jun 30, 2005 7:14 am
Go buy a kit from walmart.Cost $20,Gives you a bunch of connectors, some crimpers, a test light, battery post cleaner, But if you have a test light there you go.3 of my idiots friends ignored me again.Told them to wait for me to install his system.All 3 tried it and could not get it to work for 3 days.Finially I got him over and used my test light.No power....Even hooked to positive and the ground I'm stumped....Well figured that the factory ground is messed up somehwere so ran a piece of wire to battery and tested it and it work fine for power but HU still doesn't turn on.Come to the conclusion that it is fried, due them shorting a couple wires and blowing a few fuses.But it was working 2 nights ago.I'm sitting there thinking looking at the harness and notice that, there was no fuse in the HU.Grabbed a 15amp fuse put it in it fired right up.After this the factory ground worked again but it was still lose so just capped it off and used my new line. There was 2 problems at hand.One being it would never work due to the fuse not being in the HU.Second the factory ground was not constant.