No oil light and other dash problems. Need help.

[Tulsa_S-13]

I just practically finished my swap but when it came time to prime the oil I ran into two problems.

1. A few of the lights that come on during startup won't turn off even after the key is out. These would include the brake light and seat belt light. When we remove the "Eng Cont" fuse the lights function normally. We even disconnected the main engine harness to see if possibly my wiring was off but it still has the same problem.

2. No oil pressure light and check engine light..... I'm stumped.

BTW, the engine ground from the dash harness connector seems to have good continuity.

Any ideas?

[CoupedUp]

You should be using the KA Harness.

Which harness are you using?

[Tulsa_S-13]

Haha you bastardo!

[redtop91]

Bad Sean Callahan!!!! As to David, I'm not quite sure where you problem lies. Describe it again a little more detailed for me. You know how many times it takes me to understand things.