Nite Shades Tint or Tint Film?

General discussion area for the L32-chassis Altima
nikkitty
Posts: 2
Joined: Wed Sep 25, 2013 12:11 pm
Car: 2009 Altima SL 2.5

Post

I've had my Altima tail lights tinted very dark a few months ago using Nite Shades.. came out a little drippy in some parts but I got a ticket for them anyways so I was gonna take it off and possibly redo it.. I wasn't sure if I should use the spray tint again or opt for using a sheet of tint... any recommendations on what would be a better choice?


...And any hints on what I should use to take off my tint? ;) I didn't sand them at all and did about 3 layers of nite shade and two layers of clearcoat on top.

Image


metalmagician
Posts: 73
Joined: Sun Dec 29, 2013 11:51 am
Car: 2010 Nissan Altima 2.5s Coupe
Location: Parkesburg, Pa

Post

I remember I did tint with the spray the first time on my previous car and it came out sloppy. So try much thinner layers and more of them. Between each layer put them on heat. If u have a heat gun or space heater. I did mine like this on my altima and they came out real nice

superbad
Posts: 110
Joined: Thu Sep 23, 2010 2:17 pm
Car: 2014 alti 3.5SL
Location: Harrisburg, PA

Post

I'd go with vinyl overlays. Much easier to deal with and if you get a ticket you can easily peal them off.

I heard brake fluid will take off spray tint with some work. But also if you do this take off your tail lights because it will ruin your paint. I haven't personally done this. It's just from some reading I have done.


Return to “4th Generation Altima Sedan (2007-2012)”