NISMO mounts and the CA

[redamnavit]

Does anyone have experience with NISMO mounts on the CA? I've searched and read that they lift the KA up a bit and that the SR is fine, but nothing about the CA.

[USDM_OneVia]

They work.

Joe

[Rookie_ca18]

http://nissaninfiniticlub.net/...ounts

They work fine.

edit*

Guess you beat me to it:pface

[float_6969]

Got them on mine...

[Rookie_ca18]

Hey float, did you have a problem lining up passenger bracket with the passenger side mount. I ask be cause I can get the driver side bracket on the mount but passenger side is just being a pain in the a$$.

[Trigger]

i had that same problem with my stock mounts...i just walked away for 20 minutes and when i went back it fell right into place

Tim

[Rookie_ca18]

LOL, walked away for a day and came back but no go. I'm gonna see if i can get my friend to jack up the transmission and bolt it up and see if that helps any (tomorrow). I thought i could get it in there by myself but i guess not. Thanks

[Rookie_ca18]

Well still didnt line up, so I was thinking.... what if i just unbolted the mount off the car and bolt them to the engine bracket and then bolt the mounts to the chassis afterwards...? Does this make sense or even sound doable? Oh well cant think of anything else so let me know what you guys think.

[float_6969]

Don't do it that way. It's even harder. You'll just have to screw with it till it goes in. You may even want to completely pull the motor back out and do it over. I did that one time when I was putting a motor back in an S13 and that did the trick.

[Rookie_ca18]

Alright, I'll give that a try tomorrow.

[Tweaktac]

I got them on mine too, love them... they did fight a little when setting the engine down, but nothing out the ordinary...

[Nismo1182]

Put the mounts on the motor first, then drop it in. It takes me 10 minutes to drop the motor in and tighten all the mounts.

[blue_hauder]

Even when I put my KA in on stock mounts it was pain in the *** just keep working at it

[Rookie_ca18]

Pull the motor but didnt get to try anything due to rain so tomorrow I'll do what float said and just "screw with it" until it goes in, and if that doesnt work I'm bolting the damn mounts on there and calling it a day(hopefully) , well anyway thanks float thanks Nismo.

[float_6969]

np, let us know how it goes.