Nismo Motor Mounts Review

[240_Keyy]

Three words: Completely Worth It

I have to give a major shout out to Lime Creek Motorsports for overnighting them to me and being totally cool about the deal. Alan is a great guy to do business with and if you want NISMO stuff, get it from him.

The mounts keep the motor rock steady, which is really handy if you have a greddy or ARC pan because they sit really close to the whiteline sways and if the motor would torque over almost any, the pan would hit the swaybar. The mounts are far superior to stock and just plain kick balls...

[mattback]

not to mention cheaper than stock!!

[Dano]

Cheaper+Better=my kind of language!!!

-Dan

[BuudWeizErr]

Yup. And for some odd reason, it seems to raise the engine up just a little bit. You don't have to take off the o2 extension heat shields with them.

I've put them on both of my SR swaps and I definitely like them. Definitely worth the money.

[mickee]

ho wmany swaps did you have??? dman rich people.. or a swap that you did??? hehehehe forget it... im going to sleep...

[Aries]

Three words: Completely Worth It

I have to give a major shout out to Lime Creek Motorsports for overnighting them to me and being totally cool about the deal. Alan is a great guy to do business with and if you want NISMO stuff, get it from him.

The mounts keep the motor rock steady, which is really handy if you have a greddy or ARC pan because they sit really close to the whiteline sways and if the motor would torque over almost any, the pan would hit the swaybar. The mounts are far superior to stock and just plain kick balls...

Glad you like them Let us know if wwe can help with anything in the future

[Cyberkreig]

How hard will it be to put new mounts in after the swap. I couldnt afford them at the time.. but now i've got some extra money commin in.

[Doogz]

My review: Great product and great dealing with limecreek but i had one unexpected side effect. After talking to some CA guys the engines sits extremely close to the stock hood on the stock mounts. Which explains why my hood will no longer close with my CA. Even with this set back, i still highly recommend the mounts, especially if you don't have a CA

[TomsMR2]

its all about urethane filled stock mounts

[Aries]

My review: Great product and great dealing with limecreek but i had one unexpected side effect. After talking to some CA guys the engines sits extremely close to the stock hood on the stock mounts. Which explains why my hood will no longer close with my CA. Even with this set back, i still highly recommend the mounts, especially if you don't have a CA

yes, the CA does have that little problem but it's a great excuse to get a new vented hood

[Doogz]

I was gonna buy a new hood but my turbo ate *** so now i gotta spend all my money on that and i guess i'll be making my own hood. Time to bust out the fiberglass and bondo!

[Aries]

lol, I've done the fiberglass hood on an Impala in the past.Comes out a little interresting

[Nathan]

TomsMR2...fill the stock mounts with urethane eh? Thats a unique way of doing it, how well do they hold up? I have a CA so I dont think the nismo mounts are for me

[BadMojo]

Were these mounts originally designed for an SR engine?

Has anyone run in to any problems at all with their KA sitting 1/2" higher? Everything in this thread certainly sounds positive so far.

[Megaseth]

Aries, i need to get in touch with you about getting a set of Mounts and a new intake. i sent an email, but no reply. get in touch with me if you could, thanks.

[Aries]

Aries, i need to get in touch with you about getting a set of Mounts and a new intake. i sent an email, but no reply. get in touch with me if you could, thanks.

I can always be found at [email protected]

[Megaseth]

You have mail

[Doogz]

TomsMR2...fill the stock mounts with urethane eh? Thats a unique way of doing it, how well do they hold up? I have a CA so I dont think the nismo mounts are for me

Maybe they are for you. Maybe when i get my custom hood done you'll be all like "daaaaaaaaaammmmnnnn" and then you'll pay me good money to make you a fancy hood too. Or more likely my hood will be crooked and i'll never ever paint it.

[slw240sx]

just bang out the hood with a sledge

[Nathan]

Hahaha, Jon and I think alike

[Megaseth]

haha, sounds like my dad....and possibly me..

[i2ice4m3]

hey 240_keyy What did you have to do to get to the mounts? I have a set of good conditioned used stock mounts that I wanted to install. From what i understand you hold the motor up with a hoist and drop the cross member? Thanks a lot!