Nismo Exhaust Install

All things Altima Coupe.
User avatar
Colton92
Posts: 783
Joined: Wed May 07, 2008 3:44 pm
Car: 2008 Nissan Altima Coupe 2.5S - WinterFrost
Location: Raleigh, NC

Post

For those of you who have installed the nismo exhaust how hard is the install?


User avatar
LongBeachCoupe
Posts: 9482
Joined: Thu Aug 23, 2007 1:43 pm
Car: 08 Altima Coupe (RIP Hurricane Sandy)
2005 Lexus RX

Post

cat back for me... wasnt hard if you have air tools.. if not.. best to have someone over 150lb to help with leverage on the 2 bolts at the front of the piping..

Other than that, a couple of jack stands and an hour or so, it shouldnt be a problem...

User avatar
adidas2go
Posts: 4495
Joined: Thu Oct 18, 2007 9:49 am
Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe
Location: Raleigh, NC

Post

If you have air tools, that cool. The best way to break those bolts, is with a breaker bar. If you don't have one of those, an ordinary ratchet with a pipe on the end of the wrench will give you good leverage

User avatar
Colton92
Posts: 783
Joined: Wed May 07, 2008 3:44 pm
Car: 2008 Nissan Altima Coupe 2.5S - WinterFrost
Location: Raleigh, NC

Post

ight thanks guys. I really want to install all my mods myself and i think i will be doing this one to!!!

User avatar
mpbclutch33
Posts: 575
Joined: Tue Feb 12, 2008 1:34 pm
Car: 2008 Altima Coupe 3.5L, 6-speed, Radiant Silver.

Post

I too used air tools and it took about an hour taking my time. Good luck and Enjoy.

User avatar
Loop
Posts: 1246
Joined: Sat Nov 03, 2007 8:12 pm
Car: only nissan cars
Location: somewhere in socal

Post


User avatar
adidas2go
Posts: 4495
Joined: Thu Oct 18, 2007 9:49 am
Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe
Location: Raleigh, NC

Post



That stuff is amazing.

Be very careful with air tools. Strip or over tq a bolt, will mean bad things


Return to “Altima Coupe (2008-2013)”