NICO SR20DET MODIFICATION OF THE MONTH!!! (AUGUST)

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

. So, NICO and ENJUKU RACING have gotten together on providing you with a modification of the month. This includes an awesome price for the part on Enjuku, along with an article on how to install it. This thread will be used for you guys to discuss anything about the mod. Whether you need help, you think the mod is a necessity, or it's not very beneficial, feel free to post up.

. This month's modification is going to be Rocker Arm Stoppers. Ken over at Enjuku has hooked us up with a price reduction on the ISIS Rocker Arm Stoppers. The price is $45.99 and if you use the coupon code, NICOMod, you'll get free shipping exclusively for NICO members.

The install article can be found here.

FREE SHIPPING ALSO APPLIES FOR CANADIANS... JUST EXPECT A LITTLE LONGER FOR SHIPPING


User avatar
KYZAAC
Posts: 312
Joined: Sun Nov 08, 2009 7:09 am
Car: 92 240sx SR

Post

Awesome first mod! I was about to order these anyway.
Do you know If free shipping is available to Canadian buyers?

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

shoot an email to [email protected] for a faster response. I'm going to email him and find out the answer as well, but you'll get a faster answer if you email him yourself.

User avatar
DuckyD
Posts: 504
Joined: Thu Feb 16, 2006 6:27 am
Car: 1995 240SX
Contact:

Post

Using my idea and my article :D
I was reading through the article, which I did ~4 years ago, and noticed a few changes.
The RTV on the last picture, you really only need the RTV on the half-moon's and not around the whole gasket.

I have never had a floating rocker so technically I have never used my RAS's, but it is nice to know that they are in there.

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Figured it was a good start since you had the idea.

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Zaac, check the bold in the original post.. ;)

User avatar
Koshin
Posts: 14088
Joined: Wed Feb 13, 2008 4:43 pm
Car: JP'd out Y32 Nissan Gloria GTU
750 hp '87 Buick Grand National
'63 Chevy Impala SS 327/4 speed
Location: ...in your garage stealing your wheels
Contact:

Post

thats cheap for RAS.....are they quality?

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

They're stainless, and I've seen plenty of guys on here saying they've used them. (No complaints) Plus, it's Enjuku and they're known for their amazing customer service.

User avatar
EnjoiNismo
Posts: 1127
Joined: Tue Jul 24, 2007 5:18 pm
Car: 93 240sx
Location: AZ

Post

Thats a good price, almost half off from the others.

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Yep, and FREE SHIPPING!!

User avatar
patrickm1587
Posts: 145
Joined: Fri Jul 09, 2010 8:04 pm
Car: 1990 240sx- SR20 swap and a turbo that's absolutely too big, spools around 4,400 and I love it!!!

Post

What good do these do?

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Ever had your valve cover off? Your rocker arms just sit on there. These are designed to prevent them from coming off and possibly destroying your head...

User avatar
patrickm1587
Posts: 145
Joined: Fri Jul 09, 2010 8:04 pm
Car: 1990 240sx- SR20 swap and a turbo that's absolutely too big, spools around 4,400 and I love it!!!

Post

Hell I don't know, I've got the valve cover off now. F it, I'm orderin some.

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Smart move. :bigthumb: The install article is in the original post, as well.

User avatar
patrickm1587
Posts: 145
Joined: Fri Jul 09, 2010 8:04 pm
Car: 1990 240sx- SR20 swap and a turbo that's absolutely too big, spools around 4,400 and I love it!!!

Post

Well I ordered some last night and they were shipped out today. I was looking at the rocker arms today, you were saying that there is nothing keeping them from flying up on that one side, right? So that's why you put the stoppers on right?

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

By design, they're not suppose to cpome off, but at higher rpms, it tends to happen.

User avatar
CRyan
Posts: 1403
Joined: Tue Dec 21, 2004 6:53 pm
Car: 1997 Nissan 240SX

Post

ha I was just describing the pain of hearing one dance around in your valve train to someone today.

Hell of a deal - I'M GETTIN IT!

User avatar
patrickm1587
Posts: 145
Joined: Fri Jul 09, 2010 8:04 pm
Car: 1990 240sx- SR20 swap and a turbo that's absolutely too big, spools around 4,400 and I love it!!!

Post

So they will just fly off because there's nothing that's actually holding them down? That seems like a terrible design

User avatar
KYZAAC
Posts: 312
Joined: Sun Nov 08, 2009 7:09 am
Car: 92 240sx SR

Post

PyR0NiAk wrote:Zaac, check the bold in the original post.. ;)
Thanks, i was talking to Ken as well!! awesome deal :dblthumb: so this is good for the whole month of august right?

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Yes...

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Just curious.. Any of you used the coupon code, yet? If so, did you get your Stoppers, and if so, did you get them installed. Let us know. If this monthly mod of the month is successful, it'll stick around, and there will be all kinds of awesome deals...

User avatar
KYZAAC
Posts: 312
Joined: Sun Nov 08, 2009 7:09 am
Car: 92 240sx SR

Post

i just got my RAS today, never used the coupons yet. i got 2 coupons, 10% off any isis purchase & the $20.00 off coupon says it expires on August 1, 2010.

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

They probably sent you the wrong coupon. Call them or shoot them an email and I'm sure they'll givr you a new coupon...

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Only a couple more days, and we'll be switching to a different mod! You're never going to find a better price on NEW Rocker Arm Stoppers

User avatar
CRyan
Posts: 1403
Joined: Tue Dec 21, 2004 6:53 pm
Car: 1997 Nissan 240SX

Post

Ok. SO whats the new mod. Its after 12:01 here in my area. Let up on the part of the month, now dammit!

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Working on it..

User avatar
Rawrvasour
Posts: 166
Joined: Sun Mar 29, 2009 8:38 pm
Car: 89 Piggy

Post

I got mine, they were bent from careless packing. I just bent them back straight, also i had to use a circle file on some of the holes to get them to fit the bolts. All n all though great product install was a breeze.
Image

Modifying the baffle plate was quite simple also.

Image

wickedpelf
Posts: 750
Joined: Mon Feb 24, 2003 11:08 am
Car: 1991 240sx with super hicas

Post

got mine a couple days ago, havent installed them, just gathering parts for my build...but they look to be of good build quality. mine were in 2 layers of bubble wrap...

User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

Next mod will be announced tonight. Good to see a few of you got the RAS..

User avatar
KYZAAC
Posts: 312
Joined: Sun Nov 08, 2009 7:09 am
Car: 92 240sx SR

Post

Awesome! hope its something i need..


Return to “SR20DET Forum (rear-drive)”