NEW turbo PT61

[Structure240sx]

I ordered my new turbo 2 weeks ago from my uncles shop at his cost, saved me alot. its a precision pt61 on-center .68 turbine. bolted right up to my rev hard and downpipe, few different fittings and bolts.

i thought my turbo was dying since my air flow went down from 34% to 24-26% but its still down. has to be something else, we'll see



http://nissaninfiniticlub.net/...=1849

thats the rest of them, felt it was better than posting alot of pics like i have been

[Craving4Boost]

thats pretty damn sexy anthony....i wanna sleep with it haha...

uh oh is that another red 240 outside? hope your not plannin to buy that one too haha...

and are u gonna be online later...i needa talk to you

[Structure240sx]

thats the s13 i was gonna build up. jsut need a chance to do something with it, drift car?

[GEO]

Dirty air filter.. :: Looks around::

[S14tat]

holy big turbo batman. that **** is hugh!!! hows the boost response on it compared to your old T04B?

[Structure240sx]

kicks in a lil later, i say it starts spooling in 3rd at about 3500rpms full 15psi right after 4k

[wild_maxx]

I know this thread is old, but i didnt want to start a new one. Couple q's. I see you have this turbo listed on your website, but you don't give a good description of it. Is it full ball bearing? oil and water cooled? what are the specs of your turbo? I am interested in purchasing one of these turbo's from you for my built kae-t and would like a bit more info on them please thanx

[scarboroughdub]

and what was the max hp on the old turbo u got and what size was the turbine housing.

[Structure240sx]

yesi dont list every turbo from precision but some i do, they have quite a few

it is not ball bearing, it is not water cooled

PT6176E- COMPRESSOR SPECS Inducer mm (61mm) Wheel Inducer (2.416") Wheel Exducer (3.227") Wheel Trim (56) Inlet/Outlet (3"/2")

CHRA (360 Race Bearing) -Standard on these turbos

TURBINE SPECS - A/R Ratio (.69 on center) Wheel Style (T04) Wheel Inducer (2.795") Wheel Exducer (2.437") Wheel Trim (76)

the old turbo made my clutch slip at 420rwtq at 23-24psi, i sold that to tat a few months ago

the new turbo is rated to 680hp

email me if you need anything precision (www.precisionturbo.net)

[S13 240SX]

Do you wanna sell me the old turbo???

[nissanfanatic]

He sold it already.

Read Anthony's last post.

[GEO]

go on http://www.pintotech.com to see if you can order one.. I think you can for what I believe.

[Chezedik]

That really is a monster though, I would be happy to see the charts.

[Structure240sx]

what charts would you want to see? its not all that insane. makes good boost at 3700rpms and believer me it never drops off

i deal anything precision jsut drop me an email if you see anything you like or something you dont

[Chezedik]

dyno results

[Structure240sx]

ummm

zerothread?id=134811

that was before a couple things