Post by
monster758 »
https://forums.nicoclub.com/monster758-u171822.html
Wed Nov 03, 2010 5:27 pm
Hey guys whats up..Im Taylor and new to the world of 240's. Ive always been interested in them but been to caught up with my dsm builds. So i finally bought two 1990 240's. I dont no much about them but i droped a bunch of money into one of them. The other will be my parts car for it. this is what i got so far, let me know how im doing.brand new wheels Drag DR7's w/ new tires
Fresh Infiniti G35C Blue paint
9 Second cage ( with door swing bars ) by ralph at RP Squared
painless pro-street 12 circuit wiring harness
NEW OEM engine harness
custom shaved/smoothed engine bay
fixed headlight conversion.
LSD, HKS twin disk,
mazworx Z32 transmission adaptor kit
freshly rebuild Z32 trans
1 peice steel driveshaft.
short shifter
Haltech e8 standalone ECU
Haltech boost controller
Haltech 3 bar map sensor
GM air temp sensor.
MSD 1000CC injectors
twin intake walbro 255 pumps
Aeromotive A1000 FPR with stainless lines.
JGY top feed fuel rail
greddy "style" intake manifold, IACV Delete.
alchemy equal length tubular exhaust manifold
tial 38mm wg, vband exhaust.
tial 50mm BOV
full 3'' 1 peice I/C piping w/vband clamps ( hot side, cold side
4'' alchemy FMIC
Alchemy Aluminum Radiator
garrett t3/t67 H.O turbo ( T4 in a t3 housing )
ATP Heat shield
Turbonetics velocity stack ( for turbo inlet )
full autometer sportcomp instrument panel ( speedo, tach, boost, water temp, oil pressure )
tomei 270/270 cams
tomei solid lifters
fierra dual valve springs/titanium retainers
HKS cam gears
new OEM timing chain/guides.
wiseco pistons
eagle rods, .20 over bore
APR head studs, cometic 1.1mm HG.
Whiteline poly subframe spacers
S14 auto seatbelt conversion
Ive dumped a bumch of money into this and i have the engine put together and i can do exterior and all drive train etc, etc i just have no idea how the wiring inside goes together..i have literally the whole interior ripped out (well i actually bought it completely stripped out) and have had the roll cage put in but i have no idea how the interior goes back together (thats the main reason i bought the parts car. It has full interior). So i plan on slowly putting it all back together this winter and having it ready to go as soon as there is no snow on the ground. I will more than likely be posting alot on here starting december when i get back from work.
I will post pics if asked.