new to the forum

[sbs z31]

Hey, the name is elvis and i slide with a z31. I'm sure some of you guys have seen my car on z31performance or z31.com but here's a few pictures of the car at the last event i did last year. Didn't get a chance to get out this year due to family priorities.

[sbs z31]

This is what i do for a living.

Here's some pictures of a damaged honda b18c1 cylinder that i ported for display.



Here's stock for comparison.



Now here's a few pictures of a 1st gen miata 1.6l intake manifold i just started porting. Notice there's an egr passage that runs along the inside. I had cut it out to allow more volume for better top end and i will have pictures once it's done.





Here's some pictures of the ported miata intake manifold, it is waiting to be sent out to get welded back up.




Now here is a subaru wrx intake manifold that is still a work in progress.







Here's a few pictures of a mild race port cylinder head.




This here is a small port 4age that belongs to a good friend of mine. He did the porting but had me rework the short tun radius, install bronze valve guides, did a performance valve job and resurface.

[gmac708]

Hi Elvis
RustspecS13 (Alex) also drifts a Z31 around. That makes two I have seen.
Looks like you do pretty good work on the porting stuff.
Welcome to NICO.

[300ZXttZMAN]

my friend!