New to the board and just wanted to say Hi!

[THECHASSISSTOP]

I have a 240SX that makes big horsepower and ran 8.80 @163mph, it is my street car that gets lots of use. Has heater, AC with valid plates and insurance on the car. Here are some pics

[tctomasc]

aside from the chute and ungodly ugly but im sure completely functional wheels I would have no reason to think your running a 2jz with nas. very nice car!

[nightsauce]

2jz no s***

[derrick113]

looks verryy well put together, any vids?

[hbpignosePA]

looks cool; but if u spend all that money you think you would get a bucket in there...

those harnesses look ebayish too (im not that into harnesses but i go with brands i hear alot of)

other than that; not my style but sweet none the less

[Logan76]

Those are RCI harness' they are sold through summitracing. Car looks great, I love how simple it looks yet is ungodly fast, get some vids up.

[AZhitman]

aside from the chute and ungodly ugly but im sure completely functional wheels

Dude.

When you rnu 8's, a chute is mandatory. And those are Weld wheels - Light, functional, and GORGEOUS!

Beautiful car - Looks to be well put-together. The level of detail is incredible!!!

[33alez33]

Very nice, the turbine is a bit small though.

[noobdrftr]

thats just sick...i love it

[tctomasc]

I'm not bashing on him at all, I'm just saying he's done a very good job keeping it unmolested. I understand stopping from 163 unassisted wouldn't be too fun. But as far as the wheels, still don't feel em.

I mean its a f***en car in street trim running 8;s.... I'd love to see some numbers or a vid tho.

[zenki-S13]

super cleannice job with the 2jz

wheels are not really my style but they dont look ugly videos would be nice

[240sx_in_209]

Dam.. very nice i like how the engine bay looks clean. Dam 8.80 thats fast. How much HP u making? because for 8.80 is fast and with full interior and full widows u have to be making some big hp. Come one guys those wheels are not ment to look good, strong and lightweight excellent for dragracing

[EnjoiNismo]

wasn't that on ebay?

[THECHASSISSTOP]

Thanks guys, that is in race trim. Here is the way it spends 99% of its time on the streets.

[THECHASSISSTOP]

wasn't that on ebay?

Yes its forsale. 34K takes it.

[SirSilvia]

very clean man, when something runs 8's doesn't matter what the wheels look like.I SEE NAWS

[AZhitman]

Sexy as hell.

[urcaptnspeaking]

Car looks amazing.

[heartofaskyline]

I understand stopping from 163 unassisted wouldn't be too fun.

most tracks require a shute if your car runs 9's or less. fyi.

[S13xCrazy]

I really wish they had a icon of a smiley skeet skeeting, because that is exactly what i would be posting right now.

SOOO SEXY

[sloweighty]

so i guess you prefer and automatic for drag huh.........that how some hot rod drag racers get faster times (correct me if i am wrong)

[SirSilvia]

so i guess you prefer and automatic for drag huh.........that how some hot rod drag racers get faster times (correct me if i am wrong)

with that power I wouldn't want to let go of the wheel.

[sloweighty]

with that power I wouldn't want to let go of the wheel.

yea man....that is true huh

[Logan76]

How is your idle? you say its a street car it has to have huge injectors, how does it idle? do you have secondary injectors for startup and idle? What trans? Just pickin your brain.

[THECHASSISSTOP]

Idle is like stock. AEM engine management makes driveability like stock. The big injector concept is a myth with todays technology. With the car idling you would be hard pressed to tell the difference from a stock motor with a 3" exhaust. TH400 trans is in the car.

[THECHASSISSTOP]

Anything that traps over 150mph in the 1/4 mile needs a chute.Stats:lights, signals, heater box, air conditioning, the car is plated and insured. Complete original black leather interior,6 point moly cage, 5 point harness, removable Simpson parachute, battery relocated with custom on/off switch, aluminum 15 gallon sumped fuel cell, custom Strange adjustable front suspension, manual brake conversion, Strange lightweight billet front brakes, mustang rear disc brake setup in rear, all new stainless steel brake lines all around, 8.8 rear end with large tubes 33spline axles with Auburn lsd, ladder bar coil over setup, Weld drag lites 15x3.5 front and 15x12 rears with Mickey Thompson 28x 12.5 ET streets, CCW billet wheels 18x8.5 with 245/45/18 fronts and 19x12 315/25/19 rears, Fully built 2JZ 3.0L,Crower h-beam rods, CP pistons, Forged crank, 1mm oversize valves, fully ported heads, custom intake, Crower cams adjustable cam gears and spring, custom stainless steel exhaust manifold, 4” custom full exhaust, 80mm Borg Warner turbo with a 1.03 exhaust housing, Tail 60mm waste gate, Tail blow off valve, Precision 1700 hp air to air front mount intercooler, 4” polished pipes, manual boost controller, 90mm throttle body, N.O.S nitrous system, AEM management system with a 5 bar map sensor, HKS ignition amplifier, 160lbs/hr (1600cc) injectors, Aeromotive regulator, MagnaFuel 750 street pump, aluminum fittings and braided lines through out, Griffin aluminum rad, TH400 transmission with trans brake fully built, ATI 9” converter and flex plate, Ross machined adapter plate, custom steel drive shaft and drive shaft loop. This combo made 845 to the rear wheels

[240sx_in_209]

Anything that traps over 150mph in the 1/4 mile needs a chute.Stats:lights, signals, heater box, air conditioning, the car is plated and insured. Complete original black leather interior,6 point moly cage, 5 point harness, removable Simpson parachute, battery relocated with custom on/off switch, aluminum 15 gallon sumped fuel cell, custom Strange adjustable front suspension, manual brake conversion, Strange lightweight billet front brakes, mustang rear disc brake setup in rear, all new stainless steel brake lines all around, 8.8 rear end with large tubes 33spline axles with Auburn lsd, ladder bar coil over setup, Weld drag lites 15x3.5 front and 15x12 rears with Mickey Thompson 28x 12.5 ET streets, CCW billet wheels 18x8.5 with 245/45/18 fronts and 19x12 315/25/19 rears, Fully built 2JZ 3.0L,Crower h-beam rods, CP pistons, Forged crank, 1mm oversize valves, fully ported heads, custom intake, Crower cams adjustable cam gears and spring, custom stainless steel exhaust manifold, 4” custom full exhaust, 80mm Borg Warner turbo with a 1.03 exhaust housing, Tail 60mm waste gate, Tail blow off valve, Precision 1700 hp air to air front mount intercooler, 4” polished pipes, manual boost controller, 90mm throttle body, N.O.S nitrous system, AEM management system with a 5 bar map sensor, HKS ignition amplifier, 160lbs/hr (1600cc) injectors, Aeromotive regulator, MagnaFuel 750 street pump, aluminum fittings and braided lines through out, Griffin aluminum rad, TH400 transmission with trans brake fully built, ATI 9” converter and flex plate, Ross machined adapter plate, custom steel drive shaft and drive shaft loop. This combo made 845 to the rear wheels

Nice 845 hp to wheels.... How is your 60 foot?

[THECHASSISSTOP]

1.30

[str33tprintz]

VERY NICE DUDE Race mode looks mean but street is suuuuuper sexy... and its a DD your my hero

[THECHASSISSTOP]

8.80 video

http://www.youtube.com/watch?v=DXhG4Rmf3Xw