New parts from Cor Integration

[Cor Integration]

Hello everyone. We would like to introduce a few new product for you look at.
Cor Integration has been fabricating and producing new parts for some time now but we have not been very public about it.
In this thread we would like to show our tension rods. You can see a little more of what we do at corintegration.com
Enjoy

Features:
Quality curved design for tire clearance, made from 6061 aircraft grade aluminum, you wont rub tires on tension rods again.
Weighs less than stock.
Quality self lubricating chromoly rod ends.
Adjustable stainless hallo bolt for caster adjustabilaty.
Offsetted misalignment rod ends spacers made from 6061, close tolerance snug design to ensure positive feel mating rod ends to tension rod brace.

With our signature Chuckles knuckles, offset rack, and tension rods we are making 60 degrees of angle with an amazing 5 degrees of ackerman. We will post more numbers when we remeasure with our extended control arms.

Cost $250, get more than what you pay for.



S13












S14











Here is a little video from a while back to show some other angles. Note: the video has an old version of the tension rods. The newest version accommodates for a larger wheel size.
http://www.youtube.com/watch?v=yxSUcOBQIxM

We are developing a sway bar to parallel the curvatures of our tension rods. This way you can make full use of our tension rods and achieve unheard of steering angles.
Here is a few photos of the stock sway bar modelling that is getting done. We will post more about the sway par later as it develops.









Like us at http://www.facebook.com/corintegration

CORINTEGRATION.COM

[Hoffman5982]

Oh my. These look very nice. Are you guys planning on making rear arms? I will be in the market for some RUCA's and Toe Rods soon and for this price, I might be willing to try these things out.

I must commend you for doing something new.

[Cor Integration]

Trust me. We have been looking at everything. But our main focus is the sway bar to make better angle.

[costa_rican13]

these look very nice!! and price as well!

[95zenki man]

the stuff looks good but i gotta jump on and say

Jk i wouldnt do that to ya man.

[Cor Integration]

Thanks. We only want to make good products that make a difference.

[costa_rican13]

will you guys only be making suspension parts? or go in to engine parts as well?

[Cor Integration]

Yes we will go into engine parts in the future.

[OutToWinPAHC]

Awesome.... Too bad I got rid of the 240, I'ss have to see what's compatible with my r33

[Hijacker]

Pretty much anything in the rear suspension. Front should be different.

[Cor Integration]

We have everything in the works.

[Cor Integration]

Bumpin.
Get your angle on at CorIntegration.com

[Cor Integration]

Here is a little update with our new sway bar. We want to make more angle with our tension rods, but the job isn't done with out the right sway bar. Check it out.

[Flicktitty]

VERY COOL. i wonder if these and your sway bar would allow the my 2JZ Swapped S13 able to ride lower as of right now the factory sway bar rubs the front tension rods....

Any chance of a possible sponsorship?

[Cor Integration]

We are preparing the the sway bar for extra wheel angle at low ride height. As for right now, we are using the a stock type front section since we know it works with an ls1 with a Moroso oil pan.
Any questions or concerns about sponsorships can be sent to [email protected] along with a copy of your driving profile/history.

[Cor Integration]

Breakin in the new rollcenter Chuckles, extended arms, v8, swaybar prototype, Fedy 595RS-R's.

http://www.youtube.com/watch?v=3nXtL4uV ... e=youtu.be

http://www.youtube.com/watch?v=ly8cS4Eh ... e=youtu.be

[Razi]

Coolness!
Any pictures of the rollcenter adjusted knuckles?

[Cor Integration]

Might have something tonight but there's some on the Cor Integration Facebook page. The roll center chuckles don't have there own album yet but you can search thru and find a couple pictures of them installed as prototypes.

[Cor Integration]

Here is a little sneek peak.

[Cor Integration]

We tested some new parts in the beginning of this month. Here is a little video of running with the new roll center Chuckles and chromoly sway bar prototype.

http://vimeo.com/36945768

[Cor Integration]

Thanks to everyone that has been waiting for the arrival of our new anti-roll bar. We had a very successful test day with our first prototype in February. We made another prototype with a few small changes to get the most for our customers adding more performance, more lock, and better adjustability.
Look for Formula D driver Jason Bostom who will be the first Pro Driver to use it and getting obvious amounts of angle while still using a bolt on anti-roll bar.
Here is once more a video of very potential Pro-Am driver John Corvinus In his S13 testing the prototype.

http://vimeo.com/36945768

[Cor Integration]

Here is our progress on our outer tie rods.

[420sxWETDREAMS]

Dopeness I will be keeping an eye on this thread and get ready to buy!

[420sxWETDREAMS]

Awesome.... Too bad I got rid of the 240, I'ss have to see what's compatible with my r33

What?! Did I miss a thread or post or something? You sold you s13 lsx?

[S133P3R]

Can you post some pics of the knuckles for the s13 and such? Say no to Facebook.

[Cor Integration]

We will soon. We're making some adjustments so the photos are easier to look at.

[Cor Integration]

Here is a preview of what this will look like.
The buckle will be machined a little differently, and will anodized black with COR engraved in the flats, fallowed with post anodized machining of the flats to give a nice aluminum look with black lettering.

[Cor Integration]

New Anti-roll bars will be available soon.
Here is a preview.
1" (25.4) chro-moly.
Stiff material. Adjustable. More angle.
Going to be around $300 and worth every penny. No cutting or modding required . For the first time s13 drivers can use normal lower control arms and get plenty of lock with an anti-roll bar. Bolt on performance upgrade.

[Razi]

Daamn.
Quite legit parts!

I like what you guys are doing. <3

[bmart]

Will the sway bar clear an rb's oil pan?