new member with probably the same questions,please help.

Post by **periferal7** » Mon May 12, 2008 8:15 pm

Will I need the dropping resistor using a Microtech lt8s?I have more questions reguarding this cut loom and what wires sensors are truly needed to power up my ca18det with this microtech.But let's start with the resistor?, so I don't have tp many things at one time.Thanks for all help in advance.

Post by **ca18detgabby** » Tue May 13, 2008 3:13 am

the dropping resistor drops the imped for the injectors. what kind of injectors are you running? I would guess that you do need it, but not 100% positive as I havent used the micro tech system before.

EDIT: read the other thread on it and it uses the stock harness so yes you would need the dropping resistor assuming you are using CA injectors or other low imped injectors.
Modified by ca18detgabby at 9:24 AM 5/13/2008

Post by **progman** » Tue May 13, 2008 4:16 am

consult the manual for microtech. but ca18detgabby is probably right.

new member with probably the same questions,please help.

new member with probably the same questions,please help.

Re: new member with probably the same questions,please help. (periferal7)

Re: new member with probably the same questions,please help. (periferal7)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums