NEW here need help ASAP! Oil line and coolant lines!

[Hypnose S14]

Hello, i just need to know were the oil and coolant lines go on my Sr 20det. If you could go on paint and ""O"" with red the where i place them it will help me out ALOT!

If you could show me where the oil feed and the oil drain also the coolant i dont want to mix them up lol.



Thanks soo much you will be seeing mroe of me here. ^^

[Initial_R90]

pretty sure oil is bottom left and coolant is top left bottom right is return line make sure you have your copper gaskets

[Justin35ll]

Top left coolant (runs to the outside of the turbo, the port that is closest to the frame the one you can see) Bottom left oil feedBottom right oil returnOther coolant line runs behind the engine (from the inside port on the turbo closest to engine)

[Hypnose S14]

can you also tell me where it shouldgo on the turbo i have some line mixed up.


Modified by Hypnose S14 at 5:22 PM 2/24/2010

[I ask good questions]

first of all.. get some stainless lines. You will never regret it! Also think about getting an s14 water neck for the coolant return and just cap the hose behind the block off. its a pita to work on when the motor is in the car!
Modified by I ask good questions at 10:05 AM 2/25/2010

[Morph]

+1 for the stainless. It is so much easier when you have those to work with instead of those crap hardlines. Also download the fsm for the engine and check page 88.

Heres the download link http://www.feverracing.com/v1/....html