New here and need some advise

The Nissan 300ZX (Z32) general community discussion forum
CHernandez8235
Posts: 2
Joined: Thu Jan 26, 2017 12:39 am
Car: 1990 Nissan 300zx (z32) N/A

Post

I have a 90' z32 she started to make a weird clicking noise kinda like when you take off a coil plug and you here it click only louder she is severely misfiring I tried changing all the boots and spark plugs and but still nothing I read my codes and I have 53* I already know where the leak is coming from but that does not explain this excessively loud clicking noise any ideas I rather fix it my self then take it to a shop but she's my daily and I need her up and running properly

Thank you in advance.


CHernandez8235
Posts: 2
Joined: Thu Jan 26, 2017 12:39 am
Car: 1990 Nissan 300zx (z32) N/A

Post

Just an FYI it sounds like it's coming from cylinder 6 or 5

User avatar
Rogue One
Administrator
Posts: 7949
Joined: Tue Jun 14, 2011 10:15 pm
Car: 2011 Nissan Rogue SL
2012 Nissan Rogue SL
2022 Honda Pilot SE
2025 Honda CR-V Sport L
Location: Florida, USA

Post

Welcome to NICO!

Please note: Cross-posting (i.e. posting the same message in more than one forum board) is frowned upon. It's confusing and often counterproductive. Please choose the forum topic that is closest to your post, and place it there only. If you should create a post in one forum, and later realize it would be more appropriate in another forum, please delete the original before posting it again.

Duplicate thread deleted.

User avatar
DCaff300ZX
Posts: 4202
Joined: Sun Jun 14, 2009 8:18 am
Car: .
1993 CRP TT- Modified
Location: Tacoma, Washington

Post

Welcome!
Unfortunately you have given very vague info here with your question, and from that really it could be anything I could guess on but definitely not be accurate.
Clicking noises denote either as you guessed a spark/elec. short, or items loose and rattling just so- two things that can be checked yourself with engine running and a close, careful inspection. We here surely can't do that, especially with no pics.
So, guesses...well, IIRC 53 is EGR? Maybe a short in the EGR harness which is notorious for cracking and breaking? The harness is white covered and on the back of the engine, hard to see ever without moving a lot of wiring and such. Also, maybe the harness holder on the side of the plenum is loose and rattling?
Anyway, we have an online service manual here on the site in the stickies at the top of the page, it will help you find your problems if you are a DIY guy otherwise it's time to send it to your Z specialist of choice...and for best results find a Z32 guy or be very, very sorry most likely with a cheaper, less knowledgeable source such as general repair shops.
Good Luck, and ask away here if you find out more and have some detailed questions!

everpresentnoob
Posts: 152
Joined: Sun Sep 11, 2016 7:29 am
Car: 1990 300zx Base. Manual and abused by previous owner....

Post

Holy f***, puncuation my friend. USE IT!!

User avatar
DCaff300ZX
Posts: 4202
Joined: Sun Jun 14, 2009 8:18 am
Car: .
1993 CRP TT- Modified
Location: Tacoma, Washington

Post

everpresentnoob wrote:Holy f***, puncuation my friend. USE IT!!
A definite issue with the smart phone/text generation... :facepalm:


Return to “300ZX (Z32) General”