NEW catback systems! BRM Exhaust for 240sx

Post by **a_ahmed** » Wed Jul 01, 2009 5:53 am

dunno it just fits, i used circuitsports polyurethane hangers btw.

Post by **a_ahmed** » Wed Jul 01, 2009 6:05 am

respond to me greg, awaiting your email

Post by **7anshin8r** » Sat Jul 11, 2009 3:04 am

Thank you for a great product.

I got my tracking number on Wednesday, was installing it Thursday afternoon. Thanks for the fast shipping!

Took about 45 minutes to install, most of that was taking the old rusty exhaust off without any wd40...

If your going to do this, install some new exhaust hangers. I used new stock nissan hangers. Everything came together nice and smooth. Clearance seems beautiful. Nothing is hitting yet.

The exhaust tone is deep, like everyone said it would be. (I cranked it with just the test pipe on and no exhaust to blow out a little condensation from the test pipe, gotta say I kinda like the no exhaust sound lol) But once I put your exhaust on I could hear the difference from first start up, and I am pleased.

Post by **maj Andres** » Sat Jul 11, 2009 1:36 pm

Hey Greg, I got the stainless unit and I was wondering if it's possible to polish it back up so It'll look new again. Thanks

Post by **AZhitman** » Sun Jul 12, 2009 3:41 pm

Yep!

It's a messy job, but a can of Mother's Polish and a polishing wheel and you're in business!

Post by **asoomal** » Tue Jul 14, 2009 5:12 pm

It's been one month since I've been driving it with the new header, and holy fack this thing can get loud! Before I had the header on, it was pretty quite below 2500, and VEEEEEEEEERYYY deep. Even if you were driving at 4000, with minimum throttle input, it was pretty quiet. Now with the header, it's tad bit raspier than before, not Honda raspy, just a little.

Anyways is it possible to make one with two 14" resonators instead of having one 22" one? It might make a little bit quieter :P

Post by **uzbfly** » Wed Jul 15, 2009 10:47 am

looks good

Post by **240carcrazy** » Mon Aug 03, 2009 12:25 pm

looks like sum gud stuff

Post by **Philipio** » Thu Aug 06, 2009 6:48 am

I haven't been followed by cops once since I got the exhaust.

Post by **mick** » Thu Sep 03, 2009 4:04 pm

How do you know when the resonator goes bad? Does it plug up and stop the engine from running?

Post by **asoomal** » Thu Sep 03, 2009 5:05 pm

It starts to sound like a**.

Post by **C-Los83** » Wed Sep 16, 2009 1:58 pm

you have email, greg.

Post by **Amtk240** » Tue Sep 29, 2009 6:23 pm

I ordered the SS 2.5" dual tip exhaust with 22" resonator and new catalytic converter.

It arrived very fast and Greg kept me informed the entire time! I haven't got a chance to get it installed yet because my existing exhaust is stuck on. I have used almost an entire can of PB Blaster and the old bolts still won't budge on my old exhaust. It looks like I'll have to get some professional help for installation.

I post up again with updates and hopefully some photos of the new exhaust when it gets installed.

Thanks again Greg! I'm very proud of the exhaust and I'm believing it was money well spent!

Post by **a_ahmed** » Wed Sep 30, 2009 10:12 am

This is urgent GREG PLEASE EMAIL ME [email protected]

f***en d!ck cop gave me a ticket for the exhaust (W...T.......F.>.>!!)

I need the receipt from like what was it last year? PLEASSE.

Whatever the case I need my receipt

I got from you for my S13 KA, 2.5" stainless piping, 22" resonator, dual tip muffler and catalytic converter.

I need this s*** to show in court.

f***en bulls***, cocks i mean cops are getting ridiculous in ontario, canada. f*** YOU!

This is BULLs***, I was just getting on the highway in 3rd. Are these guys on CRACK!?!?!

Post by **AZhitman** » Thu Oct 01, 2009 6:09 pm

I'm on it.

Post by **asoomal** » Thu Oct 01, 2009 6:22 pm

You got pulled over for a BRM exhaust? Wow

I was driving mine without the muffler, just DC Sports header and the 22" res for a week (had to get my tow hook cut off). It was LOUDDD as hell, I even drove right beside cops and they didn't really care :S

Post by **Amtk240** » Fri Oct 02, 2009 7:48 pm

The old exhaust finally broke loose and the BRM exhaust is on! I only started the car in the garage to see if I had installed it with no issues and it sounds so good! I can't wait to get out on the road tomorrow to really get the full effect.

The removal of the old muffler and the installation of the BRM exhaust took me about three hours total. I just got done installing it just a few minutes ago. I had to take another shower because I looked like I just cleaned out a chimney after I got out from underneath the car but it was well worth it.

I'll update the open road results when I get to that.

Awesome exhaust, and awesome seller!! Thanks Greg!

Post by **jmiersy** » Sat Oct 03, 2009 2:31 am

is there anyone in australia using this exhaust?

Post by **bm3r** » Sat Oct 10, 2009 6:42 pm

Do you have a quiet system? Will the high flow cat lessen the sound?

Post by **AZhitman** » Sat Oct 10, 2009 7:15 pm

jmiersy wrote:is there anyone in australia using this exhaust?

It's unlikely. Shipping might be a bit expensive.

Post by **AZhitman** » Sat Oct 10, 2009 7:16 pm

bm3r wrote:Do you have a quiet system? Will the high flow cat lessen the sound?

Probably the quietest straight-through system on the market.

The only thing I have seen that's quieter was a system with a silencer - and silencers are junk.

See Page One of this thread for more info on the system.

Post by **Coki_TCA** » Wed Oct 14, 2009 12:17 pm

Simple question:Can you ship the exhaust system to Serbia?Thanks!P.S. How much $?

Post by **ConeDodger** » Mon Oct 26, 2009 8:31 am

okay 3 years later I guess I should post pics! (and its on its fourth 240!)

I do really love this exhaust system, its the 2.5" with resonator, with an OBX header and hollow cat, its the best KA exhaust system i've heard to date.

on the current CD3 :

on CD2 (may she rest in peace)

and a lame video..but this is what it sounds like with "everyday driving"

http://www.youtube.com/watch?v=bUD7Y0FAAuY

Post by **Arrow** » Fri Oct 30, 2009 10:32 am

Hey Greg, I have a question for you:

Is the price for your high flow cat including shipping? And if not the ZIP is 27617.

I have your 3" SS system (working great btw) and I just found out today that my cat supposedly has a hole in it and needs replacing.

Let me know, thanks.

Post by **GaMBiTx** » Fri Oct 30, 2009 12:31 pm

hey cone dodger, what size resonator do u have?And also with the test pip, does it pass FL emissions? (i'm in ny) which i dink is hard cuz it has sniff test also for obd1

Post by **johnny butt** » Fri Oct 30, 2009 1:20 pm

i've had this exhaust for a year now and it still sounds and looks awesome.

stainless steel & regular washing/cleaning FTW. Haven't even had a chance to polish it. I will polish it and take pics once spring rolls around after winter & salt damage is done.

Post by **spngr311** » Fri Nov 06, 2009 2:03 pm

I've had mine for over a year now and it still sound excellent! Hands down one of the best sound exhausts out there. Unfortunately, once you have this exhaust, nothing else will do! I need to order one for my S13 soon!

Post by **AZhitman** » Fri Nov 06, 2009 8:10 pm

Coki_TCA wrote:Simple question:Can you ship the exhaust system to Serbia?Thanks!P.S. How much $?

Sure - Email me an address and I will check it out.

Post by **AZhitman** » Fri Nov 06, 2009 8:11 pm

Arrow wrote:Hey Greg, I have a question for you:

Is the price for your high flow cat including shipping? And if not the ZIP is 27617.

I have your 3" SS system (working great btw) and I just found out today that my cat supposedly has a hole in it and needs replacing.

Let me know, thanks.

It's $165 shipped.

Glad you're loving it!

Post by **AZhitman** » Fri Nov 06, 2009 8:12 pm

Thanks spnger and j-butt!

Glad you guys are loving the goods!

NEW catback systems! BRM Exhaust for 240sx

Re: (asoomal)

Re: (a_ahmed)

Re: (a_ahmed)

Re: (7anshin8r)

Re: (maj Andres)

Re: (navysnail)

Re: (AZhitman)

Re: (240carcrazy)

Re: (navysnail)

Re: NEW! Exhaust for the S13/S14!!! (AZhitman)

Re: NEW! Exhaust for the S13/S14!!! (Amtk240)

Re: (AZhitman)

Re: (jmiersy)

Re: (jmiersy)

Re: (bm3r)

Re: NEW! Exhaust for the S13/S14!!! (AZhitman)

Re: NEW! Exhaust for the S13/S14!!! (ConeDodger)

Re: NEW! Exhaust for the S13/S14!!! (GaMBiTx)

Re: NEW! Exhaust for the S13/S14!!! (johnny butt)

Re: (Coki_TCA)

Re: (Arrow)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums