NEW catback systems! BRM Exhaust for 240sx

Post by **ruthless_S13** » Sat Jan 29, 2005 7:06 pm

Hey AZ!! I would like to get one for my s13 with SR20. I would like a 3" pipe with 22" res. and a single tip, with a jdm bend. If you can do that. Once I order how long till I get the product? Thanks, Josh

Post by **AZhitman** » Mon Jan 31, 2005 4:26 pm

ruthless_S13 wrote:Hey AZ!! I would like to get one for my s13 with SR20. I would like a 3" pipe with 22" res. and a single tip, with a jdm bend. If you can do that. Once I order how long till I get the product? Thanks, Josh

Josh - We can do that no problem, except I'm not sure what you mean by "JDM bend".If that means having the exhaust canister tilted or pointing out at an angle, no way.

Not only does it look goofy, but it adds an unnecessary bend in the exhaust.

There's plenty of companies that will sell you rice, we're not one of them.

Post by **Dirtylou** » Mon Jan 31, 2005 5:10 pm

AZhitman wrote:There's plenty of companies that will sell you rice, we're not one of them.

THis is why I plan to buy from BRM.

Post by **HailtotheSilvia** » Sun Feb 13, 2005 1:29 pm

Greg, this is Dan (Dookie)

The exhaust is so sweet! You cant even hear it at idle, but once you open it up, its so mean! You guys make a great product.One thing I have to complain though is I was wondering why you guys only put 3 exhaust hangers instead of 4, the exhaust hangs pretty low.But other than that, its so awesome!

P.S. When am I gonna get my NICO stickers?

Post by **AZhitman** » Sun Feb 13, 2005 4:02 pm

Hey Dan, glad you like it.

Shoot me an email with your addy again and I'll shoot the stickers out.

Thanks buddy!

Post by **StrangeLove** » Mon Feb 14, 2005 4:30 pm

I'm always broke, but for a change I have abit of money saved up. Well I just had to buy new tires and pay my insurance so I'm really stretched for cash. However, I do have enough for a new exhaust for my car.

My question: Is the $70 resonator really worth it?

Thats a good bit of money to me, and I'm not entirely sure its worth it.

I'll be getting a new exhaust either way, thanks guys.

Post by **AZhitman** » Mon Feb 14, 2005 6:15 pm

pills - The resonator is the heart of the system. Makes the sound perfect.

If you don't mind it being loud, you'll be finew/o the resonator. Basically, without the resonator, it's almost like straight pipes since the muffler is a straight-thru design and there's hardly any bends....

Post by **Kienai** » Wed Feb 16, 2005 5:04 pm

Wait wait.. So how can I get my hand on one of these? I have a KA on my car right now and I'm doing a SR swap in the summer time, would this exhause still work on the SR20DET if I bought it now? I heard some of the video clips it sounds AWESOME!!!... I WANT IT too!!!!!!........

Post by **URM S14** » Wed Feb 16, 2005 6:05 pm

AZ- will i got pulled over today for nothing today and they noticed my expired inspection sticker so i gotta get it inspected. only prob is my muffler is no longer part of the exhaust and is just a pipe cut at the subframe. im not sure if i will be able to pass like this so i may need this exhaust very soon...2.5 aluminized,22" resonator, dual tip s14.i just have 2 questions though..1. is there any way you can get it any quieter than already? id really like as close to stock sounding as possible...my subframe bushings will give me enough noise so i want to keep it down to an extreme minimum..2. Do you offer both dual tip mufflers on the 1st page?if so, id really like the one on the floor with the tips spaced farther apart..can you get me that one?sorry for the somewhat picky requests...but i regretted my last exhaust

Post by **AZhitman** » Wed Feb 16, 2005 6:17 pm

Kienai - Since the exhaust if from the cat back, you can use it with your KA and the SR. You can place an order via email, [email protected].

URM - You'll like the sound with the 22" resonator. It's quiet at idle, nice throaty, deep sound through the rpm range.

The difference in the mufflers has to do with the piping size. The wider one is a 3" system.

Nothing wrong with picky, it's your money, you should demand that you get something worthwhile. I like to think we offer that.

Post by **URM S14** » Wed Feb 16, 2005 7:17 pm

so would it be possible to get the 3" muffler with 2.5" piping? i really like that muffler better.oh and so i guess its not really possible to make it quieter or is it?because i know it may sound good but i really like stock sound the best cuz you only really hear a lil roar at WOT..thats just my taste

Post by **AZhitman** » Thu Feb 17, 2005 7:55 am

The muffler with the "close-together" tips is the one you'd receive, otherwise we'd have to retool the jig. Keep in mind the wider ones are also a difficult fit in the rear bumper notch.

Simply put, anytime you free up the flow, you add volume. If you want something AS quiet as stock, replace it with a stock system. This one will be quiet at idle, but as the rpm's increase, you'll know you've got something going on!

Post by **URM S14** » Fri Feb 18, 2005 7:37 am

AZ-if i order an give you a deposit today or tomorrow, how soon could you get it to me? i need one ASAP.

Post by **AZhitman** » Fri Feb 18, 2005 8:22 am

Takes about 8 days on average.

Some have made it out faster, but I don't like to promise and then disappoint.

Post by **URM S14** » Fri Feb 18, 2005 4:15 pm

ouch.. i would really love to get one but i may have to buy another just for the time reason...the 5 days is up on monday and i will find out id i can get an extension on time. is it possible for next thurs?

Post by **Arrow** » Fri Feb 18, 2005 4:47 pm

URM S14 - did you get a ticket already? At least from what I know you have a 30 day grace period for the most part... But it could differ from state to state...

Post by **URM S14** » Sat Feb 19, 2005 4:55 am

Arrow wrote:URM S14 - did you get a ticket already? At least from what I know you have a 30 day grace period for the most part... But it could differ from state to state...

yea i did get irt already last wedsday. i sure hope i have a grace period because i need one. AZ- do you accept credit card payment over phone? because i dont have a paypal acct and thyey take money for transactions

Post by **TigerBill** » Tue Feb 22, 2005 8:52 pm

Just got mine today!!!! And let me tell you it looks awesome!!!!!!!! Can't wait to actually put it on. That's going to happen around the first weekend in March. I'll post pics for all you that want to see the dual tip S14 model. Thanks so much Greg, you guys are quick.

Post by **hybrid_flyer** » Thu Feb 24, 2005 4:49 pm

hey greg went to check out the website...but its not up anymore what happened??

Post by **AZhitman** » Thu Feb 24, 2005 6:48 pm

http://www.brmexhaust.com/

Works fine. S13/14 page is still messed up, but the site is up and running.

Post by **hybrid_flyer** » Thu Feb 24, 2005 6:57 pm

LOL yeah the one page i need isnt workin. I am still figuring out which exhaust i am gonna need for my S14. Hopefully I will get a S13 as a daily before I need the exhaust for the Ka-T S14

Post by **Atomic-S14** » Fri Feb 25, 2005 10:20 am

wooo post up the pictures man! i wanna see the duals on s14

Post by **X1nom3D** » Sun Feb 27, 2005 5:33 am

hey thanks for that video clip

Post by **Jookmasta** » Sun Feb 27, 2005 5:47 pm

i just noticed the updated version of the dual tips for the s13? maybe i missed something, but the "close togetherness" of the tips is very very sexy. Another "Go BRM!!!!!!!" for the books. Greg does good business. Its a shame that there arent any more s13's being made as greg would have a corner on the market with these exhaust.

Post by **AZhitman** » Mon Feb 28, 2005 9:30 am

Thanks for the kind words Jook.

I used to be a little tentative about "bragging" about our stuff for the 240sx. No more.

Glad you guys like what we're doing.

Post by **StrangeLove** » Sat Mar 05, 2005 1:10 pm

I got my exhaust! It sounds badass! Perfect fit, only took 20 minutes to install.

Looks great too...

Thanks Greg, nice doing business with you
Modified by pills at 12:13 AM 3/6/2005

Post by **URM S14** » Mon Mar 07, 2005 3:14 pm

Ill have pics of s14 dual-tips and reveiw by the end of the week.

Post by **project90** » Wed Mar 09, 2005 6:13 pm

yay i just got done drivin around my 92 hatch with the BRM catback for the first time. Right now all I have is the AEM short ram and the BRM 2.5" SS w/ dualtips. Everyone says it sounds great from the outside and looks good too, however, it seems too loud compared the video. what could be the problem? I'm going to re-adjust the nuts n bolts when it cools off. Oh and I can feel the performance too . butt-dyno!

edit: anyone in the san jose/santa clara area that has a BRM... lemme know

Modified by project90 at 8:38 PM 3/9/2005
Modified by project90 at 10:37 PM 3/9/2005

Post by **URM S14** » Thu Mar 10, 2005 6:06 am

AZ-would you say there would be any negative side effects of spray painting the piping to help prevent rust forming? i was thinking of doing it hi-temp black. its good for 500 degrees. what do you think?

Post by **RMiller** » Thu Mar 10, 2005 8:04 am

I'm another supporter of BRM. I use the 3" w/ 22" resonator and dual tip with my CA. It's really, really quiet at idle and wakes up when you rev it. It's great.

NEW catback systems! BRM Exhaust for 240sx

Re: (ruthless_S13)

Re: (AZhitman)

Re: NEW! Exhaust for the S13/S14!!! (TigerBill)

Re: (Dookie)

Re: (Kienai)

Re: (AZhitman)

Re: (pills)

Re: (AZhitman)

Re: (Arrow)

Re: (TigerBill)

Re: (240dreamer)

Re: (URM S14)

Re: (pills)

Re: (project90)

Re: (URM S14)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums