NEW catback systems! BRM Exhaust for 240sx

[yokota180sx]

yep from catback like 2 or 3 pieces so it ships well

i cant find a used dart izumi around so i just want one made. but welding is UBER ****ing expensive here. like 100 bucks to weld an O2 bung on

[rhyderofthastorm]

hey, i know i inquiried about this exhaust awhile ago, but i just recently ordered my rb25 and it should be coming in tommorow. will there be any issues if i bolt this up to a stock rb25'd 240 s14? and if it's alright with the setup, send me a quote for 3" aluminized piping, dual 2.5" tip with a 22" resonator to [email protected] please.

thanks,

Richard

[AZhitman]

Hi Richard -

It'll depend on how you configure your downpipe and cat, the engine is irrelevant.

As long as you set it up so that the cat remains in the original position, you're fine.

Pricing is on the first post of the thread.

Thanks!

[Arrow]

Hey Greg, it looks as though finally after a long time comming that I will finally be placing an order for one of your exhaust systems! Although even that won't be until mid January - but it is becoming much more of a reality than it ever has been!

I have a question for you though:

I know that when you first were selling the systems the 3" dual tip mufflers had greater distance between the tips than the dual tip mufflers of the smaller exhausts. Since you reworked some of your systems about a year ago (I think that's when you did it) I have seen some pictures of the 3" systems with dual tips, and it looks as though the tips are the same distance apart as the smaller systems...

My question is: is this true, are the dual tips the same distance apart on all of your systems now?

Thanks for your time and keep up the good work!

[sivia14.5]

i have a stock 89 240 and im deciding on a stainless 2.5 or a 2.25 with 22in resonator. and im thinking about putting on headers and an intake, which exhaust will suit me better

[Arrow]

Probably the 2.5" but that in ways is personal opinion. I know that many people on here have seen consistant power gains with the 2.5 over stock and the 2.25.... and there are even those that will say that 3" provides the most power gains even when naturally aspirated... but once again, I'd say go with the 2.5" as it will allow for more flow of exhaust gasses than the 2.25" and isn't going to cost you any more to get.

Just my 2 cents....

[AZhitman]

Mark - You are correct.

Also, the tip concern you had has been resolved as you guessed.

[keith0486]

any one got a sound clip of the 3" single 4" tip on a s13 with a sr20det cus i wanna see what it sounds like to see if its what im looking for

[Arrow]

That's AWESOME news greg! I can't wait to get my funds all collected now! It's only a matter of getting my paychecks and then placing my order! I can't hardly wait! Although I will have to set up a paypal account, but that's no biggie lol.

Keith, I think that if you search the posts in this thread you might find someone that posted a sound clip that would come close to what you're looking for... and if not, maybe someone will post up a link... Good luck!

[BoBa524]

Hye greg, i got the s14 exhaust installed. its nice, clearance and fitment were nice. I sent out the civic exhaust last friday and will send out the s13 exhaust as soon as i can. I have a friend who has an s13 and wants the exhaust but the price is steep for him with the resonator that i asked for. If you wanna give him a deal on it, he will buy it asap if not i understand and it will ship out asap.

[AZhitman]

Shoot me an email, I can give him a break since I don't want to pay the extra shipping...

[Arrow]

WOOT!! I have collected the money for my exhaust system! Now all I have to do is set up a paypal account... Hey greg I don't know the proceedure in ordering through paypal or what not, but the system that I am wanting is a 3" stainless steel exhaust system with the 14" resonator and dual tips for the S13... and the last that I heard shipping was $45 to the continental US... if I'm wrong please correct me... but the shipping area code will be 27607

Thanks for all of the hard work that you are doing! and I hope that you had a great Christmas with you family! You guys have been in my prayers and I hope all is well!

EDIT:: Oh yeah, my email is mashreve(at)ncsu.edu
Modified by Arrow at 11:34 PM 1/7/2007

[joshchewuhh]

hey can i get a price quote on a 3.0" stainless steel single tip with a 22'' resonator? zip code is 90501

also the catalytic converter just reduces amount of carbon monoxide comming out of your exhaust right? do i really need this? my car passes smog already just wondering if i dont get the converter if it will affect anything?

sorry for all the questions thanks!

email me at [email protected]

[Arrow]

aside from the shipping cost, which I think is constant throughout the continental U.S. the pricing for the exhaust systems is on the first page of this thread... and in concerns to your cat, your car will not (should not) pass inspection if you don't have one. It doesn't matter about it passing smog, it would fail the visual check where the technician looks for a cat - if it's not there you won't pass....

Good luck, and welcome to the forum!

[S14Owner]

i got the S14 Straight Pipe Exhaust! :D

[Arrow]

SWEET! I managed to get my S13 dual tip exhaust installed today... I've got numerous pics, but I want to post up 2 to show you guys b/c I am worried that my exhaust is hanging too low... I think that it might scrape going over speed bumps. And even if they won't now, when the car gets lowered in the future I'm afraid that it would definately scrape then. Anyway, on to the pics that illustrate it the best:

Oh and I noticed something that might have contributed to it: on the factory exhaust there are 4 hangers, but on the mine there are only 3... Granted worn out / old exhaust hangers could cause the new system to hang a little lower - so idk...

::EDIT:: more pictures:
Modified by Arrow at 8:19 PM 1/22/2007

[homeslicej2]

ANYONE who needs a video of the BRM exhaust...i now have the videos hosted on my brother's website...Once again, this is my car and has modifications that may effect the sound...check it out guys!!!

http://www.midwestfbodymeet.com/adams240.html

-Adam

Wow! That sounds good! I used to own a 1989 Formula (305) Firebird and your car at idle reminds me of how it sounded with a stock muffler. Nice, deep tone. When I get the dough I will definitely buy this system! The current exhaust I have was put on my the previous owner and even with an 18" resonator it is so fricking loud, especially when I lift the throttle above 3k. It annoys the crap out of me, but I don't have the money to change it yet to what I want. 3" SS w/resonator, high-flow cat, and dual-tips (3" for the future motor swap w/turbo )

[Arrow]

Hey guys, I've got 2 videos of the 3" SS exhaust w/ 14" resonator hosted on my website... not sure how the bandwidth will handle a lot of people viewing the videos, but for now they are up and working Here they are

*BTW, in the video my car is completely stock except for the exhaust - so this might help those that are wondering about the sound of it on a completely stock 240*

[AZhitman]

Definitely consider replacing the exhaust hangers, I finally got new ones for my car and it made a big difference.

Believe it or not, it actually decreased the vibrations as well.

[KRUZNBY]

^^Where did you get it installed or did you do it yourself?

[Arrow]

I did it all myself. The hardest 2 parts were A) removing the old and rusted bolts on my stock exhaust and B) cutting off the tow hook where the exhaust is. I would say that this is an easy 2 person job (it helps to have one person hold the exhaust up while you are under it bolting and attaching it to the hangers) or an easy one person job with say a box or two to prop up the new exhaust...

[homeslicej2]

Nice! Now I am definitely going to get it! Man I wish I had the money for it right now!

[Arrow]

I added 3 more pictures to my previous post, just incase anyone wants to see how it looks on the car, and forgive the dirty car and everything...

[C3Sar4U]

ohhhhh

/drool

haha ive been looking for a new exhaust system, been wanting to get the Apexi N1 Duals but i just heard these and they sound sexy as hell!!! this is exactly wut ive been looking for... that nice deep throaty sound...

my car is currently stock and the only mod i wanna do is the exhaust and the intake...maybe lata on ill do the header although i dont know yet

anywho....you should b hearing from me soon...once i round up some dough ill def hit u up...

wut setup do u suggest?

[sleeper07]

Hi i have been looking for a exhaust system for a while now i think the Brm is the best product for me. i was also wondering if u would take money orders. thanks

[nismostyle240]

humm this exhaust sounds like what im looking for are there any sound clips available ?

[Arrow]

nismo, look up about 8 posts above yours... I have 2 files hosted on my website that I linked to up there (both files only take the exhaust up to 4k rpm under no load)

[FDNiss240sx]

How much for a 2.25 aluminized, hi-flow cat, 18" resonator and dual tip for a S14, shipped to 11769
Modified by FDNiss240sx at 6:08 PM 2/6/2007

[Arrow]

Greg can correct me if I'm wrong, but as I calculated it to be:

$610

P.S. Look at the very first post of the tread, it has all pricing except shipping which I think is universally $45 within the continental US

[AznClarity]

Think you can email me the sound clip for the BRM Exhaust? [email protected]. Thanks.

James