New BRM products for the G35!!!

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Got 'em, Bill - Thanks much!

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

AZ. You might want to check back to the exhaust thread on G35 driver. There is more confusion and it is like the blind leading the blind.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Can do.

Those guys will eventually realize all the good info is here.

Post by **Cold_Zero** » Mon Nov 24, 2003 9:24 am

hey booger,Does the aftermarket make a piggy back ECU for the G35? I have one (WRX) that will allow me to modify the maps on the fly. It may save you money in the end. I saved about $200 with a piggy back ECU over reflashes (if I go to stage 3). I didnt have to be without my ECU for any period of time and I can always go back to stock when needed.

Post by **booger** » Mon Nov 24, 2003 9:24 am

Cold_Zero wrote:hey booger,Does the aftermarket make a piggy back ECU for the G35? I have one (WRX) that will allow me to modify the maps on the fly. It may save you money in the end. I saved about $200 with a piggy back ECU over reflashes (if I go to stage 3). I didnt have to be without my ECU for any period of time and I can always go back to stock when needed.

Yes there is , and Im going with one or the other after the SC install . They are still coming out with piggy backs, so Im going to decide on thay later .I may have to reflash back to stock .I going to find a one that can change fuel maps and adjust timing all in one. On another Forum , I read that there have been a few guys that have done it with out going F/I . Im kinda new at this stuff and Im taking my time . Trying to learn on the fly .

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

UPDATE:

2 sets of G35 headers left, it's gonna be at least a month before we can fabricate more as we're doing some new jigs for some new products... Therefore,

Free shipping on the next 2 sets of G35/350Z headers!

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

Very tempting offer Greg, but I just can't do it yet. I'll have to hit you up for some after the next batch is made.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

LOL- I think I'm just gonna ship you a set COD.

I'll make sure there's a picture of them on the outside of the box....

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

What was the price on those again? I was kind of wanting to switch my navigation over to video/DVD next or NOS, but this is tempting.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Bah - Phooey on electronics, it's all about the POWER!

Headers are $795 shipped (next month, shipping returns to $40)

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

To bad that wasn't installed. That will be another $650. As for power the nitrious install is getting closer everyday.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

If someone's charging you $650 to install the headers, it's time to find a new mechanic. That's dealer pricing or more.

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

AZhitman wrote:LOL- I think I'm just gonna ship you a set COD.

I'll make sure there's a picture of them on the outside of the box....

Yeah, pictures are always nice and make things even more tempting. Maybe I should just get a part-time job, that way I can use all that money to just take care of my car.

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

AZhitman wrote:If someone's charging you $650 to install the headers, it's time to find a new mechanic. That's dealer pricing or more.

You could come and show me how to install them.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

:naughty

:icesangel

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

Are there any other plans for the G35 Greg? How about a Y-pipe?

Post by **Forte** » Mon Nov 24, 2003 9:24 am

Greg what's the price on the headers? Let me know

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

Forte, You need to post some pics of your car. I would like to see it. Here is the link to members rides.http://www.nissaninfiniticlub....x.php

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Forte - The stainless ones are $795 + shipping.

Linda, Darren's G is SOOOO sweet looking! Those rims with the body-color calipers peeking out are the stuff!!!

Plus, it sounds like all hell breaking loose at full-tilt on the dyno!!!

Post by **GeeThreeFive** » Mon Nov 24, 2003 9:24 am

I figured that by reading his sig. You couldn't talk him into the BRM exhaust? Do those pulleys make any difference? I would like to get the blue ones. I'm also thinking about the crawford plenum.

Post by **Forte** » Mon Nov 24, 2003 9:24 am

GeeThreeFive wrote:I figured that by reading his sig. You couldn't talk him into the BRM exhaust? Do those pulleys make any difference? I would like to get the blue ones. I'm also thinking about the crawford plenum.

The pulley does make a difference. Stock pulley weighs 10 to 12 lbs UR pulley weighs about 2.5lbs. Spins a lot faster. I plan to get the headers, but at the meet it was already ungodly loud. I will post pics as soon as I figure out how. lol:help

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

Forte, just post your pics in the "Member's Rides" section.

Post by **Forte** » Mon Nov 24, 2003 9:24 am

AZhitman wrote:Forte - The stainless ones are $795 + shipping.

Linda, Darren's G is SOOOO sweet looking! Those rims with the body-color calipers peeking out are the stuff!!!

Plus, it sounds like all hell breaking loose at full-tilt on the dyno!!!

Thanks man soon as I return from Florida April 6th leaving on Sat. I'll get with ya on the headers.

Post by **Rex** » Mon Nov 24, 2003 9:24 am

Forte

See the link in my sig about uploading pics.

Here's a tease ... (click for the jumbo-tron version)

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Wonder if any of those pulleys would match up to the Q45? :thinker:

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

Bumping just so we don't forget.

Post by **AZhitman** » Mon Nov 24, 2003 9:24 am

Thanks Ryan.

I actually still have 2 sets of headers ready to roll, going to halt production for a month or two so we can catch up on some other projects.

Post by **jdmfreak** » Mon Nov 24, 2003 9:24 am

Wow! I see BRM has been busy. Keep up the good work.

Post by **jdmfreak** » Mon Nov 24, 2003 9:24 am

Also is there a full pic of the G that Rex posted?

Post by **rydwhite** » Mon Nov 24, 2003 9:24 am

I don't think that Forte has loaded up his pics yet. Actually, I haven't even seen or heard from him in a while. There should be pics of his G in one of the threads from the big meet in March.

New BRM products for the G35!!!

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums