NEW! BRM products for the Altima!

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

In response to overwhelming requests from Alty owners, BRM has just completed its new line of catback systems for the 1993-2001 Altima!

While pricing and details are not finalized yet, we have systems built and ready to ship as of this posting.

I'm guessing we'll keep pricing in line with our prices for the 240SX, and you can read details about the quality, construction, materials, sizes and (estimated) pricing here:

http://www.nicoclub.com/forums...48608

Feel free to email me with any other questions....

Thanks guys!

Post by **Altiman94** » Thu Mar 04, 2004 6:10 pm

sounds good to me. I 'may' be looking into buying another U13. If I do end up buying one, I'll go with this exhaust if its under 500.

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

It's under $500.

Post by **Altiman94** » Thu Mar 04, 2004 6:10 pm

very nice. I found a 93 XE 5spd for 1800. It's in very nice condition. I'm not sure how it runs, but I'm gonna go check it out again on wed. if I have time.

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Not a bad deal if it's clean and "healthy".

Post by **Cold_Zero** » Thu Mar 04, 2004 6:10 pm

Any word on an exhuast for the 2002 and up Altimas?

Or any discounts for a WRX cat (*cough downpipe*) back exhaust?

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Bud - You have mail.

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Bump - Revised pricing on the BRM Altima catbacks, now in stock and ready to ship!!!

Post by **Importroller** » Thu Mar 04, 2004 6:10 pm

so what is the new price. I looked on the BRM site, and there was no listing for the altima

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Ah - Sorry...

Still working on updating the site. I'll do this: All pricing for the S14 will apply to the Alty for now.

Prices are listed in the first post of the sticky at the top of 240 Gen Chat.

Post by **Importroller** » Thu Mar 04, 2004 6:10 pm

i checked the S14 section, and I didnt see a price listed. what kinda price would I be looking at? Im interested in new options now for my exhaust system, and i will probably buy a few different kits, and make a final decision on the one that has the best gains. But price does matter to me too

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Here you go, guys!

The BRM Altima systems are constructed of mandrel-bent, T-304 stainless steel (or aluminized mild steel) in 3", 2.5" and 2.25" diameter. Flanges are 3/8" billet pieces and the exhaust has been tuned for a non-ricey, throaty sound.

The Altima exhausts terminate in a 3.5" chrome round tip. Our fabricators have over 80 years combined experience in custom exhaust design.

Altima catback pricing is as follows:

2.25"aluminized $330, stainless $4302.5" aluminized $330, stainless $4303.0" aluminized $380, stainless $460

A resonator can be added to any system for $70. For the stainless systems, the 14" resonator is available. For aluminized systems, a 14", 18" or 22" resonator can be selected.

Contact me via email with any questions (or to place an order).

Post by **00_Altima MD** » Thu Mar 04, 2004 6:10 pm

is there a catback system for the 2k and 2k1 altima

Post by **Importroller** » Thu Mar 04, 2004 6:10 pm

this may sound stupid, but what is the difference between aluminized and SS? besides the price tag. I know stainless shouldnt rust, but is that the only difference

Post by **ultimatuc** » Thu Mar 04, 2004 6:10 pm

00_Altima MD wrote:is there a catback system for the 2k and 2k1 altima

the said catback will fit your car.

Hey Greg. I left you a message last week about doing a 3' turbo downpipe for the first and sec gens. did you get it? There is a handfull of people from the "other" site who would be buyers.

[email protected]

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

Got it...

I have downpipes for the Sentra with Bluebird conversion, and the Sentra with GT-R conversion.

I don't suppose those help you?

Post by **AZhitman** » Thu Mar 04, 2004 6:10 pm

s13/altima wrote:this may sound stupid, but what is the difference between aluminized and SS? besides the price tag. I know stainless shouldnt rust, but is that the only difference

Correct. The stainless is resistant to corrosion.

Otherwise, they are the same in appearance, weight and thickness.

NEW! BRM products for the Altima!

NEW! BRM products for the Altima!

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums