New 240, New Build. Drift/Auto X

[Future_gohan]

Ask me how stoked i am, just ask!

I just got a complete free 300zx brake upgrade for my 240sx. i'll be installing them tomorrow! Can't waitt

anyone wanna buy my old calipers/lines/brakes/rotors?

[Future_gohan]

Nomm









Also found out my body kit, if the tag is correct, is mold 46?

So I will buy front conversion lines next week, i don't NEED them, but i'd rather just play it safe you know? The rears i will use the z32 lines because your able too, at least for a little bit, and then get rid of that metal line down the road.

Also, i'll be doing the whole ebrake swap too, Just need the cables and i'll be set.

[Future_gohan]

Well, I didn't get a chance to install the ebrakes today, because I have to find a shop to get the axles off the hubs. So i just install the rotors(which i'm buying new ones, but to roll around on these will do), brakes and rear calipers.

I'm ordering my lines from drift tough when i get paid Monday, also getting a new caliper Monday as well.

I also pushed my car into the street to see how my car actually sets, because my parking space is super messed up. Seeing it I want the rears lower, I'm going to lower the springs some and see how that helps.

Other than that.. I'm still waiting on my engine to come back :[

[Future_gohan]

[Future_gohan]

Well, didn't really do much today, i mounted up my intercooler and installed some of my dash, but mainly got my pass side skirt on right and got my dads 472 jimmy running.

Got more stickers? lol

I got one of the limited edition jimmy up stickerss.

Cluster in, dash bolted in and did some wiring for my new gauges and such.



Got the tow truck running "lets make sure 4 wheel drive works"

[Future_gohan]

[Idahos13]

Nice man! It's looking good, when you gonna get ur engine back?

[Future_gohan]

hopefully another week of waiting, and i'll have it back. Then i give it another week after that and it'll be setting in my car again.











I finally installed my traction arms, installed my new brake lines(which were a b**** btw), put my coils on right and got some new 18in burnoffs. woo. thanks kyle. :p

[Lonismos14]

Are you 7 4 ? I know how it is to wait every day that u walk past the car u hate it more.

[Future_gohan]

Are you 7 4 ? I know how it is to wait every day that u walk past the car u hate it more.

no why do you ask? That's not me in the pictures lol I'm 6 1. Reason the rear end was up so high was because i was put the traction arms on and needed to lay on the ground. and i hate my car everyday. untill it goes vroomm pshh again. :[

which! btw, won't be very much longer.

[Lonismos14]

Because you have a black flag on you rearview mirror is why i asked are you 7 4 or GD. sorry gang talk.

[Future_gohan]

oh lol my baddd

[Future_gohan]

also, sense i couldn't find just ONE z32 caliper, i had to shell out for two, i got a super deal(100 shipped) for two 26mm calipers with no hardware, figure i'll buy the pins and stuff at nissan, because they still sell them. and get all new pins for my calipers, then get hawk pads for the front, and keep the ones i have now in the rear, because they're brand new.

also, sense this isn't much of an update, i have moved the front rims for the first time sense i parked the car like 5 months ago. i was soo happy nothing hits or rubs.

[Chris28]

Not sure how I've missed this whole build, it looks like it's coming along nicely.

Good wheel choices!

[Future_gohan]

Not sure how I've missed this whole build, it looks like it's coming along nicely.

Good wheel choices!

nobody likes my car, and i wouldn't blame them.

[Lonismos14]

Actually im following your build there is probaly alot of people just like me that dont say nothin and just watch.

O and i like the sideskirts to.

well back to watching...

[Future_gohan]

Actually im following your build there is probaly alot of people just like me that dont say nothin and just watch.

O and i like the sideskirts to.

well back to watching...

lol thanks that makes me wanna keep updating it. :p

I'm still trying to go baller status and go full interior. I'll give anyone rear s14 5lug hubs for a full hatchback interior minus dash center and door panels. )

other than that i installed my powered by max tie rod end spacers, new tie rod ends, and i am now able to move my rims, tomorrow i'll be installing my battery box and my positive and negative cables. plus other stuff.

[Future_gohan]

The front bumper is on by 2 zip ties, so thats why its sagging. lol

I didn't do much, it was a dirty slut so i cleaned it up. nice bathh.

[Future_gohan]

Installed my altima fans again, i'm using my nos bottle from last year as an over flow again, just because it was there when i built the car first, it'll stay just because of that. :p

i also installed the engine harness, so now all i'm doing is waiting on the engineee.

two daysssss.

[Didderson]

Lookin closer to being finished man. I be lurkin ur build too heh. Really hoping you get it done on time given the trouble you had with the machine shop and other stuff. Skirts are crazy wide, but they gowith the bumper and wheels so +1 crazy drift kit yo

[Future_gohan]

Lookin closer to being finished man. I be lurkin ur build too heh. Really hoping you get it done on time given the trouble you had with the machine shop and other stuff. Skirts are crazy wide, but they gowith the bumper and wheels so +1 crazy drift kit yo

Yeah, I love the way the kit looks. I'm hoping my engine is complete Monday when i go to pick it up, when i talked to him two weeks ago he said hell have it done by monday, so lets see, if not i'm going to stab him. :/

[Future_gohan]

well still no engine...he didn't even start it yet. its been almost 2 months.

[Didderson]

Maybe its time to buy a torque wrench and do it urself.

[Future_gohan]

Maybe its time to buy a torque wrench and do it urself.

i'm putting it together myself. lol its the bore balance oversized valves and port/polish i can't do. lmao

[mRodiek]

A good machine shop is so hard to find, tell him hes got a week before you pick it up & take it somewhere else, give him some motivation lol

[Didderson]

Yeah I wouldn't ever be able to do that either LOL. Good call.

^^he's right though. You can't send your engine to a mechanic who keeps it around for months that's like a friggin time warp trap! If you find another person then I'd say give him an ultimatum.

[Future_gohan]

M

Yeah I wouldn't ever be able to do that either LOL. Good call.

^^he's right though. You can't send your engine to a mechanic who keeps it around for months that's like a friggin time warp trap! If you find another person then I'd say give him an ultimatum.

My dad told me he was the best around, that's why i took it to him, and he knew what he was talking about with my ka, but hes just taking forever, and its really making me mad, i want my engine in mah caww.

[Future_gohan]

Okay, i awile ago i ordered 10 sun auto ground wires(i'm using them for my 300zx and my dads truck, so i got a lot lol) and i was bolting a few down, one for the head one for the intake, as seen above ^ Where else should i ground the ka?

also decided to just fix my harness, so i spent a few hours today re doing it all up nicely.

also got a pair for free, 5 lug 17x7 +40, decent for burn offs i guess. lol

[Future_gohan]

Getting my ka tomorrow, sending out my ecu tomorrow. Getting s*** donee.

http://www.youtube.com/watch?v=NTWLNjxOdNc

[Lonismos14]

What you know bout king coopa. That dude in the back ground in the photo shoot i went to school wit him he from san antonio tx. Dude got flow and oopa signed him.