need to verify specs on 240sx brakes

[TrunkMonkey]

the rotors are 10" in diameter and 18mm thick right?

anyone know the diameter of the caliper's piston?

-demetrius

[Exar-Kun]

I'll check into it D.-chet

[tex240]

not big enough imo

[Dori Dori]

ABS cars are 2mm wider on the front IIRC.

[crzycav86]

What does IIRC mean?... I see that all the time, but I can't figure out what the acronym stands for..

[Exar-Kun]

if I remember correctly

-chet

[Hijacker]

I don't think the ABS rotors are larger, just the calipers. But I could be wrong.

[Dori Dori]

According to my FSM, Rotor outer diameter x thickness for the front is as follows:

W/out ABS 252x20mm (9.992x0.79in)

With ABS 257x22mm (10.12x0.87in)

The rears, as I thought before, are the same.

[TrunkMonkey]

20 & 22mm? hmmm. this might not be worth it then, but...

the rotors from a 91-93 nissan nx2000 (w/abs) have the same 10.1" diameter as the 240 w/abs, except they're 26mm wide. i haven't been able to verify it, but the caliper/piston may also be bigger than the 240's.

parts for the nx2000 brakes aren't much more than the 240. this might be an option for all the 4 luggers who want better brakes but don't want to switch to 300z's.

keep in mind, none of this has been physically verified by me. i'm only going by specs that i just happen to find from several different sources.

-demetrius

[Dori Dori]

An option to think about is the JDM S13 brakes.

[Dori Dori]

Here you go, some specs for you...http://forums.freshalloy.com/u...06796

[Dori Dori]

Other options too:http://forums.freshalloy.com/u...58148