Need to talk to anyone who hung out with Matt Stanton

[cartoonlips7]

I bought my sr20 from matt and he took the engine apart.. i remember hanging out one day with some of his friends one guy sold him the engine first and he is off to the navy so need to talk to either zack of well forgot the other peoples names.. sounds wierd i know but i'm lost on a few things just need some help

[CoupedUp]

Might as well ask your question here to us too man.

[cartoonlips7]

well i bought an engine off of him that he took apart and then stuffed in my garage.. he was suppose to help me put all the bolts together so i would know which bolts are to what.. i work at kennedy motor service in colerain i've done alot of engine work but unless i take an engine apart myself at least once i can't figure out where everything goes and fits.. plus i don't know what this sr came out of he never told me.. 180sx or silvia.. what year and all.. plus no ecu so ordering on has become an issue.. lol

[cartoonlips7]

o by the way i'm in the process of doing mass bodywork on my 89 coupe.. i know the engine is an s13 and i like your silvia conversion =)

[swatteamtimmah]

i would say your best friend is going to be the service manual...

[Hijacker]

i would say your best friend is going to be the service manual...

QFT. Putting an SR together isn't that big of a deal. Even if you didn't see it all come apart. In my signature is a link to my motor build, which I took a ton of pictures of the assembly process. It should help you identify the big sections of the motor for reassembly. I have all the pictues for the last section downloaded off my camera, but I haven't formatted them and uploaded to the internet yet. But the last section is primarily bolting all the little housings and stuff back onto the motor.

[swatteamtimmah]

QFT. Putting an SR together isn't that big of a deal. Even if you didn't see it all come apart. In my signature is a link to my motor build, which I took a ton of pictures of the assembly process. It should help you identify the big sections of the motor for reassembly. I have all the pictues for the last section downloaded off my camera, but I haven't formatted them and uploaded to the internet yet. But the last section is primarily bolting all the little housings and stuff back onto the motor.

sure pictures will help, but unless you have the torque specs your not getting very far....since when IS a service manual a bad thing to have around? If you would LIKE the service manual theres a link floating around on the boards.

[cartoonlips7]

this link I will search into.. got my driftspeed sr20det build.. learned some things off that.. so i'll get manual i've been looking for thanks