need to know the size and pitch of these bolts please help me(authentic tt 2+2)

[rkreimer10]

i have a jdm 94 300zx tt 2+2 z32 fairlady z. here are some pictures of what im looking for so you can get a petter idea. i need everything to bolt up the front crossmember, transmission, drivesahft, the nuts for the shocks. every bolt to basically put the front end of the car together. hope the pics help

i need everything to bolt this back onto the chassis of the car.

here is the front end dissasembled

here is a pic of the interior for ****s and gigles

thanks for all the info and help i will try to go to the nissan dealer but the guy in the parts department isnt the brightest guy and has ordered me the wrong part numerous times. so im just going to a hardware store to buy the bolts.

ryan

[nsrZ32]

I'd suggest you find another dealership or somebody with a parts car. There are a TON of bolts to put everything back together. What happened to the ones that were there in the first place?

[NSRsheets]

[rkreimer10]

thought i said but i guess i didnt. they never got shipped with the car. they were supposed to but didnt oh well. and im supposed to be buying a parts car on monday so if that goes through i will have plenty of left over parts that will possibly be for sale. the only thing i know for sure i will be taking is the leather interior if its in good condition. and i will replace it with the jdm interior. and the bolts. other than that i will part out the rest of the car. so i will let everyone know when im done(hopefully about a month) then i will sell the parts car or part it out. ill let everyone know whats going on

ryan

[evildky]

why not use the hardware on the car you are putting the swap into? shoud all be the same

[rkreimer10]

because their is only one car. when the company in japan disasembled the car they for got to pack the bolts to bolt this stuff back on the jdm chassis. i only have the jdm chassis and motor. all the parts in the picture were shipped from japan. i do not own any parts from a usdm z32. im hoping the parts car i have lined up comes through

[deknick]

how did you get the car? i thought USA had a 25 year importing rule? and even in Canada, you can only import a 92 right now. Was it shipped to you dissambelled?

[evildky]

ugh, gonna be a lot of expensive bolts, nuts and washers, although even at dealer prices shouldn't be too bad, but your steering wheel is on the wrong side no way I could drive wrong side like that

[rkreimer10]

ya im just going to buy a parts car then strip off what i need then sell the rest of the stuff ie, 5lug conversion to someone with a 240 to recoupe some of my losses.so hopefully about another month till its put together and cleaned up. then i just have to wait for the inspection for the u.s. title. i hope it passes the first try.

ryan

[gpelite]

Still, shes nice. RHD is always something I think about

[rkreimer10]

update>> i went to nissan and got a diagram of the front suspension. my next door neighbor is going to rent out his shop to me at 60 bucks month so now i will have a warm place to work and just about every tool known to man. so what we are going to do is get the c ar in the air take mass amounts of quality pics. then put a tap in each bolt hole to find the right pitch. then go the nissan dealer and show them all the info i gathered with the parts circled and hopefully he will get it right this time.

so all in all i should have this car done in about 2 weeks after i recieve all the parts i need. i hope the bolts are the only thing thats missing. this will be a hell of a lot cheaper but take more time than a parts car. so i will post pics regularly of the build after she is in my possesion. so by sunday i sould know what im looking at as far a time frame. thank you everyone for your feedback.

stay tuned for more pics.

ryan