need some help quick guys with my hardbody

[hellonwheels8506]

First off sorry for not searching but Im pressed for time, My girlfriend drives my hardbody and shes a first timer driving stick long story short the clutch is bad and needs to be done within the next day or 2 and I just payed all my bills dont have the cash for a brand new one at the moment, but I have a brand new SR clutch pressure plate, ect, can it be used??? even if its just the clutch plate?, I also have another brand new clutch pressure plate and ect sitting around but im not sure what its for, weather its for a KA twin cam or what, It has the same spline count as a stock ka single cam clutch but the clutch plate is slightly larger in diameter and the pressure plate is thicker than the stock Ka single cam pressure plate, the Ka single cam clutch and pressure plate im compairing it too is out of a single cam 240sx if it matters.

[hellonwheels8506]

well after doing some reading on here, it seems the single cam 240sx pressure plates and clutches are smaller than single cam hardbody clutches so i think the one i have is actually a clutch for a hardbody considering the splines are the same as the 240sx's clutch its just bigger than the 240's in diameter and the pressure plate is a lil beefier

[nismopu]

I think its supposed to be 245mm for the HB cluth diameter? Also, all nissan transmission's use the same splines. peace.