Need recommendation for injectors

elpiar: Posts: 531; Joined: Fri Sep 29, 2006 7:11 am; Car: 1992 KA-T

Quote

Post by elpiar » Wed May 23, 2007 5:03 am

I need something to support 400whp @80% duty cycle. I suppose something like 600-650cc/min?

What do you guys recommend? Is side feed always going to be more expensive than topfeed?

Top

S13FX: Posts: 1892; Joined: Sat Apr 30, 2005 10:59 am; Car: '69 l20b Dimeski :)

Re: Need recommendation for injectors (elpiar)

Quote

Post by S13FX » Wed May 23, 2007 5:24 am

Top Fed FTW.

It's easy to convert your side fed to top fed too ..

Top

Florida240sx: Posts: 11114; Joined: Thu Jul 01, 2004 7:17 am; Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5; Location: DeLand FL

Quote

Post by Florida240sx » Wed May 23, 2007 6:04 am

deastchwerks

Top

lrb_2000: Posts: 2854; Joined: Tue May 03, 2005 6:41 pm; Car: '91 Nissan KA-T hatch; Contact:
Contact lrb_2000

Website

Quote

Post by lrb_2000 » Wed May 23, 2007 9:31 am

Yeah.. get some 650cc's from deastchwerks.

Top

nissanfanatic: Posts: 1314; Joined: Mon Nov 01, 2004 8:41 pm; Car: 1992 Nissan 240sx SE; Contact:
Contact nissanfanatic

Website

Quote

Post by nissanfanatic » Mon May 28, 2007 5:28 am

My 740s were throwing around 84% tops on my 419whp tune. But I run a little rich compared to most at 11.3:1.. If I pulled some fuel out to around 11.7:1, I'd probably drop to around 80%...

Top

boznuttz: Posts: 3515; Joined: Tue Mar 14, 2006 11:25 pm; Car: MS13

Quote

Post by boznuttz » Mon May 28, 2007 10:19 am

+1 for Deastchwerks

Top