need pic of fn 17x9 4x114.3 et20

[iHEARTmyCS14]

pic request for 5zigen fn any color, but have to be 4x114.3, 17x9, and et20, thx u ! speacially on kouki thx u

[ThuG LyFe]

same request please....except on a zenki.

i heard it would sit flush...and it seems to be a good size but i wouldn't mind seeing it either. does anyone know if they will require fender roll if you have it on coils?

[keith0486]

i dont think there is y not just 17x9

[TerminalVelocity]

All 17 x 9 +20 have the same overall fitment. 4 or 5 lug doesn't matter.

+1 for pics though.

[iHEARTmyCS14]

well i saw the 5lugs 1 they look deeper then 4luggers but not sure by how much

[adrianfromthecastle]

n00bz



all of which are 17x9 +20 in 4-lug

[s14tan]

It depends on which offset you choose.

If you get a +12 offset you'll get a "concaved" wheel.

[adrianfromthecastle]

It depends on which offset you choose.

If you get a +12 offset you'll get a "concaved" wheel.

wrong.

the concave face doesnt come in a 9". Minimum for concave is 10"

[ThuG LyFe]

^yea i already know about splparts and already saw those pics...i would like to see them on a S14 tho to see if they require any rolling to fit w/ coils.

[adrianfromthecastle]

^yea i already know about splparts and already saw those pics...i would like to see them on a S14 tho to see if they require any rolling to fit w/ coils.

I'd say fitment would be similar to that of the s13's. If anything, s14 fenders have more room to play, probably a 5-10mm difference.

[Jiggyfry]

Played out or not I think they look good in silver with a proper drop.

Anyone have a pic of the 17x10's?

[adrianfromthecastle]

Anyone have a pic of the 17x10's?

ask, and ye shall receiveth

da homie Eddie's s13 with 10's in da rearz

da homie Jason's s14 with da tenz in da rearz

both of which have over exaggerated rear pulls must be an FN thing to do

[nismofly]

for the people looking for the 17x9 s14 fitment, there you go, on the front of jason's car...itll be 5mm different with +20, basically barely noticable

[naed240sx]

UGH

[s14tan]

hmmmm don't mean to thread jack but would 17x10 +12 fit on the front of a s14?Stock suspention.

[naed240sx]

You need to search man.

It will, but it will stick out like 2 inches.

[Jiggyfry]

Thanks Adrian!

[s14tan]

You need to search man.

It will, but it will stick out like 2 inches.

I was just curious.Thanks.