Need passenger door panel for 08 a/c

Post by **isaac_b** » Mon Jan 26, 2009 6:04 am

so yea was letting my bro do my tint and he used a heat gun on the passenger side and melted the material on the top part of my door panel... i called nissan they charge 500+... so anyone know where i can get a black passenger door panel for an 08 a/c with premium package (leather interior not the cloth)

Post by **Sith LL_Coupe** » Mon Jan 26, 2009 8:23 am

I don't know where to get a passenger door panel, but seriously... pay a professional next time for a tint job. I know everyone likes to do the DIY stuff, but putting tint on a car is almost nearly an art-form in imo.

I've heard so many people complain on this forum that they had bubbles on their rear windows after they had them tintned... and these were from people who had them done at a shop... by professionals... Imagine how successful you will be compared to someone who does this for a living.

Post by **AppleBonker** » Mon Jan 26, 2009 9:00 am

isaac_b wrote:so anyone know where i can get a black passenger door panel for an 08 a/c with premium package (leather interior not the cloth)

~$400 plus shipping

Or you can try junkyards (though I haven't seen too many scrapped ACs).

Post by **rjdmmfl1** » Mon Jan 26, 2009 9:10 am

Sith LL_Coupe wrote:I don't know where to get a passenger door panel, but seriously... pay a professional next time for a tint job. I know everyone likes to do the DIY stuff, but putting tint on a car is almost nearly an art-form in imo.

I've heard so many people complain on this forum that they had bubbles on their rear windows after they had them tintned... and these were from people who had them done at a shop... by professionals... Imagine how successful you will be compared to someone who does this for a living.

... trying to save $100 will now cost you $400 plus shipping

http://www.everythingnissan.co...gid=0

again, you can definately try to find a junk yard and see if they have any A/C's! THat will be your best bet.. other than that, prepare to get hosed!

THis is the reason I chose to just do custom A pillars rather than go with punching holes in the doors of my A/C for my 3 way components

Post by **saywat** » Mon Jan 26, 2009 11:39 am

lol..heat gun

Post by **isaac_b** » Tue Jan 27, 2009 6:17 am

yea he did good the 1st time but had to pull if off because i had to get my ticket for tint dropped and this time instead of just closing the garage door and run the heater he used a heat gun. i hate when he does bs like that but its ok hes the one paying lol.

Post by **dangeris** » Tue Jan 27, 2009 6:25 am

rjdmmfl1 wrote:
THis is the reason I chose to just do custom A pillars rather than go with punching holes in the doors of my A/C for my 3 way components

I bought replacement A pillar for my car and they cost $25 each side. Much better than $400 a side Good luck man!

Post by **vonivo** » Tue Jan 27, 2009 8:08 am

rjdmmfl1 wrote:
... trying to save $100 will now cost you $400 plus shipping

http://www.everythingnissan.co...gid=0

why isn't your brother paying for it? he ruined it he pays for it. This post should have been in the classified section that might have helped you might want to make a post and link to it there...

Also do you have pic's of the damaged part? if not can u take a few with your phone so i can keep on the lookout for ya.

Post by **ShadowAltima** » Tue Jan 27, 2009 10:40 am

AppleBonker wrote:
~$400 plus shipping

Or you can try junkyards (though I haven't seen too many scrapped ACs).

hey dude, you from brooklyn, you know who does excelent tints, thes mexicans on bedfored... mad cheap and no bubbles

Post by **isaac_b** » Wed Jan 28, 2009 7:16 am

Heres pics of the panel. you cant really tell i laid black paint on it so you cant really tell but it will rub off easy and i have a feeling it will get bigger or some shiz lol

Post by **Sith LL_Coupe** » Wed Jan 28, 2009 7:31 am

ShadowAltima wrote:
hey dude, you from brooklyn, you know who does excelent tints, thes mexicans on bedfored... mad cheap and no bubbles

First off, the OP is not from Brooklyn, neither is AppleBonker, so I assume you're refering to me. I don't have the problem with the botched tint job. I had my tints done from 212Motoring (a very reputable company) and they did a great job. Cost me $180, and I have a 1 year warranty. Secondly, I would never refer someone to some "mexicans" on Bedford Ave. It's not only bad advice, but a bigot remark.

Secondly, to the OP... I know your brother is going to pay for it, but that doesn't really look all that bad. I know it's a brand new car, so any damage to it is painful, but it could have been a lot worse. I wouldn't even worry about it.

Post by **isaac_b** » Wed Jan 28, 2009 8:09 am

oh yea not worried he offered so i was like ok. no rush to do it... he owes me any way i gave him over $1,000 to get his supra running... guess this and a artisan exhaust will make us even huh?

Post by **tint2xtreme** » Wed Mar 25, 2009 7:35 am

have a repaired black pass panel 07 coupe also burnt by heat gun repaired it for dealer then bought new one was brand new car on lot. have panel for sale for 275 + shipp. call @ chris 901-406-8259 if still need one

Need passenger door panel for 08 a/c

Need passenger door panel for 08 a/c

Re: Need passenger door panel for 08 a/c (isaac_b)

Re: Need passenger door panel for 08 a/c (isaac_b)

Re: Need passenger door panel for 08 a/c (Sith LL_Coupe)

Re: Need passenger door panel for 08 a/c (rjdmmfl1)

Re: Need passenger door panel for 08 a/c (rjdmmfl1)

Re: Need passenger door panel for 08 a/c (AppleBonker)

Re: Need passenger door panel for 08 a/c (vonivo)

Re: Need passenger door panel for 08 a/c (ShadowAltima)

Re: Need passenger door panel for 08 a/c (Sith LL_Coupe)

Re: Need passenger door panel for 08 a/c (isaac_b)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums