need info on ka swap

[adkins_s13]

got a 90 240 with a single ka in it and going to the dual ka whats the easiest way to swap.

[exnihilos]

just start doing that s*** and if you get stuck on something read up on it and jump on that s*** again. repeat.

[KA24DE-T Bound-Drfter]

Ehh don't just throw it in. . Inspect it. . .replace the clutch get new plugs and wires. .just so you don't run into spark problems and s***. . .trust me I just threw a motor in before and there was so much s*** wrong with it. . . .get a good ka from a reliable source.

[rioredstang]

I bought a wrecked car. Took it home and started. I have 1990 with a auto, and I put a 93 5 speed in it. I got everything I needed, Wire harness, ECU, pedal assy, I took everything I could think and then some. I had a few body parts and interior I saved just in case I needed them. Then sold the rest to scrape yard. This way you have the whole car to pick at and transfer all the parts you need without running back and forth to a salvage yard.

[adkins_s13]

see i already have the motor just have to get it down to me that was in the trade. i basicly have two full cars am i going to have to swap the full wire harness or just the motor harness i dont want to rip my dash apart if i dont have to the interior is mint.. ill get some pics up shortly.

[rioredstang]

I don't know for sure that you have to swap the engine harness. I went from auto to stick. also I went to a newer obd1 ecu. I would put it in first and start matching up connectors, then decide if you need to change.

[adkins_s13]

alright cool thanks for the advice... im sure i will need more as it goes along. this is my first 240 swap and hopeing it goes smooth for this is my only car.. dumb to trade a running car for two thats not. live and learn