Need help with wiring!!!

[newCA18DET]

Ok well my friends and i have been working with the wiring on this CA for about 3 days and we cant get the god damn thing to run. I am almost done with this project and ready to give up. If anyone can help let me know. I am in the Nashville, TN area if anyone is local and can stop in and maybe point something out that we are over looking.

[beans33]

hey buddy I live in Murfreesboro. What problems are you having with the wiring ? Its the same as an SR20.

[newCA18DET]

I cant get the injectors to click... the fuel pump is coming on but the injectors are not opening. I dotn know if something is wired wrong or what. But I would really appreciate any help. Thanks

[beans33]

You might have a bad cas.

[newCA18DET]

What is the CAS and where is it?

[oversteer180]

Its the big *** round sensor thing on the front of the motor with the little mitsubishi symbol on it. Take the bolts off and pull it out carefully. It might have alot of **** on it and just need to be cleaned or the end piece could actually be chipped/broken off.

[newCA18DET]

Well there was nothing wrong with the CAS so I dont know what to do. Its getting fuel up to the fuel rail and its sparking, but the fuel is not going through the injectors. I need help now.... I want to drive this mother ****er!!!

[c-rad]

Are you using the injector resistor pack?

[newCA18DET]

No i dont belive mine has one... should it have it? I am lost. I thought it would be easy but maybe I am just making it harder than it really is. I just need someone to come look at this damn thing.

[c-rad]

No i dont belive mine has one... should it have it? I am lost. I thought it would be easy but maybe I am just making it harder than it really is. I just need someone to come look at this damn thing.

Yes, you need it. Its a silver box about 4 to 5 inches long and an inch wide.

[newCA18DET]

Does the KA not require one? I guess i Need it... where can i get one?

[newCA18DET]

Well I got the resistor box and hooked it up and the same thing is happening... When I got my harness is was hacked all up so i guess its just going to take a LOT of time and patience... I still have wires that i dont know if they need to be hooked up or not... Like I have a solid blue one that just comes out of the middle of the harness... WHere the hell does that go? Thanks for all the help

[c-rad]

pics would really help in this situation

[newCA18DET]

Ok... In the first picture there are 2 plugs that come from the CA harness towards the battery. The one on the left has a solid white and solid black wire. The one on the left has a blue/white stripe and solid black.

In the second picture there is a single wire that just comes out of the middle of the harness. The MAF sensor wires and wires that run to the resistor box are in the same harness. The single wire is solid blue.

[newCA18DET]

here is the second picture

[newCA18DET]

Can anyone tell me what the wires above go to?^^^^^^^

[newCA18DET]

Does anyone know what these 5 wires go to?^^^^^^ I have been trying to figure it out and have looked it up but cant find it... I am trying to get it running before this weekend... THanks