Need help with turbo water return line. ><

[crazyfast]

A idlot did engine swap for me, but he didn't hook up the water return line.. I got red top SR with S14 T28 turbo... can anyone show me the pic where it goes?? There is water going in to turbo, but no where to exit... it's leaking pretty bad from turbo water return fitting which he just pluged it with a screw... -_-Plz anyone help me, I did some search for 2 weeks... can't really find anything..

[twofourzeroSX]

it has a line that connects to a rubber hose...the rubber hose is a small one located behind the motor inbetween the motor and the firewall next to where all your heater hoses are...

oo and have fun reaching it!!!

[Nismo_Freak]

The water feed is the line behind the block. Look on the block (exhaust side) you will notice there is a threaded hole that is open. The hardline should be a good guide as to where the correct point is.

Make sure the idiot didn't bend your oil line and install it into the water jacket.



If you look just above the turbo inlet you can make out how the line goes into the block. There is also a line going into the block to the left of the motor mount, that is the coolant line IIRC. Basically you will notice it because it will not have a line going to it.