need help with thermostat

[boostloading]

Can anyone give me pictures of the location of the thermo stats for a 91300zxtt is? And any pictures of the wirings for the temp. Gauge?

[boostloading]

[t.mcginley.jr]

See the two aluminum water pipes coming off the front of the engine? The thermostat is inside the bottom one.

The top water/coolant pipe has two sensors threaded into it. The bigger one (closer to pass. side) is the temp gauge for the ECU and the smaller one (closer to driver side) is for the temp. gauge. The smaller temp gauge one is just one wire from the sensor to the gauge.

[boostloading]

Thanks!

[Roguepriest1287]

this may help http://www.youtube.com/watch?v=HCtSIZY-yg0 gives a break down of reaching the thermostat

[Ruber Ducky]

This is the walkthrough I used when I did mine. It's easy to do yourself.

http://www.pexcom.com.au/z32cms/e107_pl ... ontent.234

[Roguepriest1287]

This is the walkthrough I used when I did mine. It's easy to do yourself.

http://www.pexcom.com.au/z32cms/e107_pl ... ontent.234

Yea I was really surprised how easy it was to do didn't take long at all. With the coolant flush and a few smoke breaks it only took me like 2 - 3 hours to do

[boostloading]

Do u guys know the size of the L ranches?

[Ruber Ducky]

Do u guys know the size of the L ranches?

Here's what you need.

http://www.300zx-twinturbo.com/cgi-bin/ ... t&total=15