I have an Infiniti G37 (2011). I used Nissan Consult III Plus to enter the pin and start programming new Key Fobs.
I was able to clear the existing keys , but am not able to program the new Fob(s).
Consult III provides instructions, but the Key light never blinks 5 times as it indicates that it should.
I have tried all 3 options:
Replace ECM (used part)
Replace BCM
Register Key
For each of the options, it gets stuck at the same place. Please help me understand the sequence of commands I need to program the new Keys.
This is a Push to start vehicle and is completely stuck right now.
Thanks,
Neal M.